Hello, waitingTime uses a speed threshold of 0.1m/s to determine whether a vehicle is waiting, whereas the <laneAreaDetector> uses a configurable threshold that defaults to 1.39m/s (5km/h). regards, Jakob
2015-07-24 8:23 GMT+02:00 François Vaudrin <[email protected]>: > Hi, > > I installed a detector in a lane edge and I added this line in additionnal > file. There is a big blue line on that lane on the GUI and it seems to > correspond to the sensor surface. OK > > <laneAreaDetector id="det-S11" lane="-S11_0" pos="-120" length="119" > freq="2000" file="result_lane_detector.xml" friendlyPos="x"/> > > Within results , there is the haltingDurationSum : The sum of all halting > durations of vehicles that entered the area and are still inside or have > left the area within the reported interval. > > I have also created before a file that shows the results of each edge. > > http://sumo.dlr.de/wiki/Simulation/Output/Lane-_or_Edge-based_Traffic_Measures > > WaitingTime : The total number of seconds vehicles were considered > stopped in a edge > > If the detector covers a whole section (edge), I understand that > haltingDurationSum and waitingTime should give similar results. > > If this is the case, there is too much difference between the two results > and I do not understand why. > > Regards > > François > > > > > > ________________________________________ > De : François Vaudrin [[email protected]] > Envoyé : 22 juillet 2015 13:33 > À : Michael Behrisch > Cc : [email protected] > Objet : Re: [sumo-user] The longest vehicule waiting time for every edge > > Danke Michael, > I think it should suit my needs. > Regards > François > ________________________________________ > De : Michael Behrisch <[email protected]> > Envoyé : 22 juillet 2015 07:45 > À : François Vaudrin > Cc : [email protected] > Objet : Re: [sumo-user] The longest vehicule waiting time for every edge > > Hi François, > > Am 2015-07-22 06:47, schrieb François Vaudrin: > > Is there a function to know what was the the longest waiting time in > > each edge during simulation ? For example , if there have been 200 > > vehicles that traveled in edge_x and the one that waited the longest > > time is 83 seconds, is it possible to have this data directly or we > > must calculate it ? I do not need the vehicle ID, only the waiting > > time of the one who has waited the longest time in every edge. > > Lane Area detectors could do the trick, they output a maxHaltingDuration > http://sumo.dlr.de/wiki/Simulation/Output/Lanearea_Detectors_%28E2%29 > > Regards, > Michael > > > > ------------------------------------------------------------------------------ > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > > > ------------------------------------------------------------------------------ > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
