Awesome!, thanks Jacob!
I am actually trying to model the first-detection time.
I get the following output: a lot of <recognitionPoint> tags under <seen>,
which makes sense. I just want a little clarification, what is tBeg? if it
is when the vehicle entered the receiver's range, that's what I actually
want. You've been tremendous help, if you can pin point where should I look
for description of the parameter/attributes like tBeg etc, that would be
great.
*<seen* id="lr_0" *tBeg="64.49"* observerPosBeg="1005.60,-4.95"
observerSpeedBeg="0.00" observerLaneIDBeg="L2_0" observerLanePosBeg="4.10"
seenPosBeg="905.65,-1.65" seenSpeedBeg="28.18" seenLaneIDBeg="L1_0"
seenLanePosBeg="905.67" tEnd="71.27" observerPosEnd="1005.60,-4.95"
observerSpeedEnd="0.00" observerLaneIDEnd="L2_0" observerLanePosEnd="4.10"
seenPosEnd="1105.55,-1.65" seenSpeedEnd="30.00" seenLaneIDEnd="L2_1"
seenLanePosEnd="1105.56" observerRoute="L2" seenRoute="L1 L1">
*<recognitionPoint* t="64.85" observerPos="1005.60,-4.95"
observerSpeed="0.00" observerLaneID="L2_0" observerLanePos="4.10"
seenPos="916.04,-1.65" seenSpeed="28.35" seenLaneID="L1_0"
seenLanePos="916.04"/>
On Mon, Sep 7, 2015 at 4:37 PM, Jakob Erdmann <[email protected]>
wrote:
> use sumo option --bt-output.
> regards,
> Jakob
>
> 2015-09-07 15:09 GMT+02:00 Ahsan Shafique Chaudhry <[email protected]>
> :
>
>> Thanks Jakob
>>
>> As you pointed out. Now, I have a stopped vehicle with btreceiver device
>> in xml:
>> <param key="has.btreceiver.device" value="true"/>
>>
>> while all the generated traffic are equipped with:
>> <param key="has.btsender.device" value="true"/>
>>
>> How can I write information of the car which is detected on some output
>> file?
>> Can you give any hint?
>>
>>
>> On Fri, Sep 4, 2015 at 11:20 AM, Jakob Erdmann <
>> [email protected]> wrote:
>>
>>> Hello,
>>> Road side units are currently not supported. You could place a stopped
>>> vehicle
>>> on an extra lane next to the road to accomplish your purpose. (The range
>>> is a
>>> configurable command line parameter).
>>> regards,
>>> Jakob
>>>
>>> On 09/03/2015 12:18 PM, Ahsan Shafique Chaudhry wrote:
>>> > Hi
>>> >
>>> > Is there any tutorial on how to add detectors? I have added btsender
>>> device
>>> > in vehicles using this:
>>> > <param key="has.btsender.device" value="true"/>
>>> >
>>> > I want to add a btreceiver detector on the road and also I want to
>>> > configure what should be the area covered by bt devices. Any help
>>> would be
>>> > useful.
>>> >
>>> > Thank you
>>> >
>>> ------------------------------------------------------------------------------
>>> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>>> > Get real-time metrics from all of your servers, apps and tools
>>> > in one place.
>>> > SourceForge users - Click here to start your Free Trial of Datadog now!
>>> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>>> > _______________________________________________
>>> > sumo-user mailing list
>>> > [email protected]
>>> > https://lists.sourceforge.net/lists/listinfo/sumo-user
>>>
>>>
>>
>
------------------------------------------------------------------------------
_______________________________________________
sumo-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sumo-user
