Hello, - if you do not specify edge lengths, they will be computed automatically from the geometry of nodes and intermediate points. - if you have specified custom lengths and wish to go back to automatic lengths, set a value of -1 for the length in netedit. You can do this for the whole network at once by selecting all edges and setting all lengths to -1 at the same time. - note, that edges are shorter than the distance between junctions due to the space taken up by the junctions themselves (lanes that connect across junctions are generated automatically.
regards, Jakob 2017-02-03 11:37 GMT+01:00 Nicola Frasson <[email protected]>: > To whom it may concern, > > > I have created a network using NetEdit, without checking on the correct > lenght of edges. After that, I have inserted in the parameters the correct > lenght for every lanes, I need to know if it is possible with Sumo to see > edges in scale with or if I have to stretch manually each edges . > > The reason is that during the simulation I can't see the correct queue and > vehicles overlap each other. > > > Best Regards > > Nicola > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
