Hello, 1) is currently not possible but planned for the futre (see http://sumo.dlr.de/trac.wsgi/ticket/2434) 2) if you assign the id of a <routeDistribution> to the route attribute of the calibrator <flow> and set departLane="best" you can specify the appropriate distribution of turning ratios and each vehicle will be inserted on the correct turning lane.
regards, Jakob 2017-05-17 11:13 GMT+02:00 Dominik S. Buse <[email protected]>: > Hello, > > I want to adapt existing traffic to measured traffic from the real > world. According to the wiki, calibrators (with route probes) are the > tool of choice for that. > > The measurements I have are from induction loops close to the halting > lines of junctions, one per approaching lane. This lets me separate the > traffic by turning direction (left, right, straight) for the typical > junction, where each turning direction has its own lane, which is > exactly what I want. > > However, the calibrator's wiki page [1] states that > > > A single calibrator per edge is sufficent as each calibrator will also > > count the flow on all neighbouring lanes of the given lane attribute. > 1.) Is it still possible to position multiple calibrators on each edge, > each on a different lane and responsible for the respective turning > direction or would they interfere? > 2.) Otherwise, is there any other way to have different flows of > vehicles on a single calibrator, each for one turning direction on the > next edge? > > Kind regards, > Dominik S. Buse > > [1] > http://sumo.dlr.de/wiki/Simulation/Calibrator#Building_a_scenario_without_ > knowledge_of_routes.2C_based_on_flow_measurements > > -- > Dominik Buse, M.Sc. > Distributed Embedded Systems (CCS Labs) > Heinz Nixdorf Institut, Paderborn University, Germany > http://www.ccs-labs.org/~buse/ > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
