Possible causes: - permissions disallow some one of the lanes - one of the target lanes does not allow continuing the route later on (i.e. because the outgoing edge is succeeded by a 1-lane edge further downstream) - the straight-going vehicles are inserted on the same lane and the traffic does not saturate that lane - the vehicles all have the same speedFactor (hence the same speed) and thus cannot overtake each other (see http://sumo.dlr.de/wiki/Definition_of_Vehicles,_Vehicle_Types,_and_Routes#Speed_Distributions )
regards, Jakob 2017-05-24 19:10 GMT+02:00 Rohit Tapikar <[email protected]>: > Hello, > > I have a scenario where vehicles move in a particular direction on a road > that has 3 lanes.The rightmost lane is used for vehicles turning right(I am > using a left sided system) and the remaining two lanes are for straight > going vehicles.But the problem I am facing is vehicles are only using one > of the lanes while crossing the traffic signal.I want both the lanes to be > used simultaneously.How to do that?? > > > > *Rohit Tapikar* > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
