Please send me sample parameters for moveToXY (x,y, angle, ...) that cause invalid mapping. regards, Jakob
2017-07-01 23:12 GMT+02:00 Chunhui Yu via sumo-user < [email protected]>: > Hello, > > I programmed to update car position in a link and the occupied lane by the > function movetoXY via a TraCI connection. I used keepRoute=2. movetoXY > works well when cars are in a link. However, it produces wrong car > placement when cars are within an intersection area. In version 3.0 and the > development version, cars may disappear or be located at a wrong position. > In version 2.9, movetoXY (with keepRoute=2) works well for some vehicle > but locates some vehicles at a wrong position. Attached are the network > file and route file. The positioning of left-turning cars from the lane > with index = 0 in link JA_J1 within intersection J1 is wrong with movetoXY. > > Any ideas how to fix the problem? > > Thanks, > Chunhui > -- > > 俞春辉 > Chunhui Yu > > Ph.d Candidate, College of Transportation Engineering, Tongji > University, Shanghai, P.R. China > Visiting Student, University of Michigan, Ann Arbor > > Tel：(+001) 734-999-7418 > Website: http://www.yxggroup.com/ViewMember.aspx?ID=92 > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > sumo-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/sumo-user > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sumo-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sumo-user
