Hi Patrick No Patrick! I wasn't talking about an EOT correction when I described how to correct an analemmatic sundial for full moon time readings. When I moved the gnomon six months ahead, I was correcting for declination. It is no coincidence that this worked. I didn't want to confuse the issue further by mentioning EOT correction. You are right that an additional correction for EOT improves the time reading. You can also correct for the amount of time from the moon's being exactly full.
John John L. Carmichael Jr. Sundial Sculptures 925 E. Foothills Dr. Tucson Arizona 85718 USA Tel: 520-696-1709 Email: [EMAIL PROTECTED] Website: <http://www.sundialsculptures.com> ----- Original Message ----- From: "Patrick Powers" <[EMAIL PROTECTED]> To: "John Carmichael [NASS]" <[EMAIL PROTECTED]> Sent: Saturday, December 21, 2002 7:07 AM Subject: Moontime & Sundial Types Message text written by INTERNET:[email protected] >I simply placed the analemmatic's moveable vertical gnomon on the June 21 summer solstice point on the date line and the huge time error was corrected!< Really? That was lucky I think it must just have been coincidence.... The EoT for the sun applies just the same to using the moon only of course there are other corrections you need to make if you use a dial other than at the instant (to the minute or two!) of full moon. Fred wrote an article on this in an early BSS Bulletin (or a NASS Compendium - I forget which!) He gave a method of correction but it showed up that there were still huge errors when trying to use moonlight... I am sure he'd remember the details if you contacted him... Regards and best wishes for the solstice, Christmas and the New Year!! Patrick ------------------------------------------------------------------------- Forwarding addresses: E-Mail: [EMAIL PROTECTED] Web: http://www.dunelm.org.uk/homepages?patrick_powers Lat: N 51d. 49m. 09s: Long: W 00d. 21m. 53s -
