With a conventional polar gnomon, having a nodus somewhere along its length, 
hour lines radiate from the foot of the gnomon. Babylonian and Italian hour 
lines (measured from sunrise and sunset respectively) are straight lines, but 
don't have a common point. Taken together, they form a network of triangles on 
the dial.
Surprisingly perhaps, a spherical gnomon gives the opposite effect: 
conventional hour lines are straight but don't have a common point, whereas 
Italian and Babylonian hour lines radiate from a point. That point is where the 
foot of the gnomon would be if the centre of the sphere were a nodus on a polar 
gnomon. Think of the sphere shrinking to its centre, if you like. 

Italian and Babylonian hour lines can very easily be calculated: they are 
exactly coincident with the conventional half-hour lines of a horizontal 
sundial. Their common point is where the foot of a polar gnomon would be if it 
passed through the centre of the sphere. Where you would label a line with an 
hour number, double that number to give the Italian or Babylonian hour. So, the 
10 o'clock line becomes 20. The edge of the sphere's shadow will be tangential 
to this line both at 20 hours after dawn and 20 hours after sunset.

To calculate conventional hour lines, one way is to start from these same 
lines. At 10 o'clock, the shadow of the centre of the sphere will fall on the 
10 o'clock line. The shadow of the whole sphere will therefore be a circle 
equal in size to a diameter of the sphere, centred on that line. Depending on 
the sun's declination, the shadow may be at different positions along the line. 
But its size is always the same, so it will always just touch two lines 
parallel to the 10 o'clock line already drawn, and a distance equal to the 
sphere's radius from it. Therefore, the hour lines you need to draw to read 
conventional hours are these lines parallel to the Italian/Babylonian lines. 
You don't need both sets of lines unless you want to be able to read from both 
sides of the sphere. 
The effect of drawing both the conventional-looking lines, which are actually 
for the Italian and Babylonian hours, and the lines parallel to them needed to 
read conventional hours, is to create an attractive grid of triangles.

Hope this helps
Regards
Chris Lusby Taylor

  ----- Original Message ----- 
  From: mohammad reza noruzi 
  To: [email protected] 
  Sent: Monday, January 01, 2007 1:54 PM
  Subject: sphere gnomon


  hi all

  i want to make a sundial(a horizontal one)with a sphere gnomon....how can i 
calculate the hour lines?

  regards...

  pejman noruzi


  __________________________________________________
  Do You Yahoo!?
  Tired of spam? Yahoo! Mail has the best spam protection around 
  http://mail.yahoo.com 


------------------------------------------------------------------------------


  ---------------------------------------------------
  https://lists.uni-koeln.de/mailman/listinfo/sundial

---------------------------------------------------
https://lists.uni-koeln.de/mailman/listinfo/sundial

Reply via email to