I found the problem and it sounds like a sunray software bug. ce0 is the
public network and ce1 is the sunray interconnect. I've defined ce0:1 as a
virtual interface to connect my sunray from home via a VPN. Adding this
ce0:1 virtual interface seems to mess up the various sunray scripts when
executing utadm. Unplumbing ce0:1 solves the problem when using utadm.
Thierry.
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
ether 0:3:ba:9b:47:dd
ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.252.1 netmask ffffff00 broadcast 192.168.252.255
ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.16.128.7 netmask fffff000 broadcast 172.16.143.255
ether 0:3:ba:9b:47:dd
On Mon, 29 Aug 2005, Lebar, Russell J wrote:
> Thierry: The issue sounds like it is DHCP/Java related. Have you changed
> /usr/java or /usr/j2se? Have you verified DHCP and the DHCP tools still
> work?
>
> Hajime: FYI, On Solaris 10 systems you should check /etc/inet/ipnodes
> first and then check /etc/inet/hosts (ipnodes is read first). You should
> also keep the IPv4 entries sync'd between the two files. [ The
> /etc/inet/ipnodes file has actually existed since Solaris 8 but the
> installer never put any entries in it so unless you were doing IPv6 you
> could ignore it. However, the Solaris 10 installer actually populates it
> so you now how to pay attention to it. ]
>
>
> Some interesting trivia: Solaris 7 Hardware Release 5 contained new
> versions of the DHCP tools that required a new version of Java to work.
> Now, since Maintenance Updates only contain the patches apply MU5
> applied the DHCP patches but did *not* include the new Java version they
> needed to work, effectively breaking DHCP. Not very good for a Sun Ray
> server.... ;-)
>
>
> -- Russ
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of hajime suzuci
> > You can check some files as following:
> >
> > /etc/inet/hosts
> > /etc/inet/netmasks
> > /etc/inet/networks
> >
> > If any "SunRay" entry is in those files, ifconfig works
> > automatically.
> > Or ... DHCP configuration ?
> >
> > Regards,
> > Hajime Suzuci,
> >
> >
> > Thierry Delaitre wrote:
> > > i tried to remove the interface of the sunray interconnect
> > and put it
> > > back and there are some interesting results:
> > >
> > > bash-3.00# /opt/SUNWut/sbin/utadm -d ce1 ### Removing Sun Ray
> > > information for interface "ce1"
> > > Configuration for DHCP interface ce1 does not exist.
> > > ### Removing Sun Ray interface configuration for "ce1"
> > > LAN connections are on to allow Sun Ray connections from shared
> > > networks Do you want to turn off LAN connections? ([Y]/N): n
> > > bash-3.00# ifconfig -a
> > > lo0:
> > flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
> > > 8232 index 1
> > > inet 127.0.0.1 netmask ff000000
> > > ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu
> > 1500 index 2
> > > inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
> > > ether 0:3:ba:9b:47:dd
> > > ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4>
> > mtu 1500 index 2
> > > inet 192.168.252.1 netmask ffffff00 broadcast
> > 192.168.252.255
> > > bash-3.00# /opt/SUNWut/sbin/utadm -a ce1 ### Configuring
> > > /etc/nsswitch.conf ### Configuring Service information for Sun Ray
> > > Error: unable to add vendor options to dhcp:
> > > Error: cannot add SunRay symbols to dhcptab:
> > > Could not create the Java virtual machine.
> > > Error: cannot add server macro "SunRay" to dhcptab:
> > > Could not create the Java virtual machine.
> > >
> > > The only thing i did was to apply the latest recommended
> > patches for
> > > Solaris 10!
> > >
> > > BTW, is 3.1 being released soon ?
> > >
> > > Thierry.
> > >
> > > On Sat, 27 Aug 2005, Thierry Delaitre wrote:
> > >
> > >
> > >>I've got 2 sunray servers configured as a group. I'm sure i had
> > >>configured them as a group. however, the secondary server is now
> > >>telling me that the sunray interconnect framework (ce1) is not
> > >>configured ! is this a bug ? Is that because i've ran utadm
> > -L on after or defined an ip alias on ce0 ?
> > >>
> > >>Thierry.
> > >>
> > >>bash-3.00# /opt/SUNWut/sbin/utadm -a ce1
> > >>Error: Interface "ce1" already configured; cannot add
> > >>
> > >>bash-3.00# /opt/SUNWut/sbin/utadm -l
> > >>LAN connections: On
> > >>Sun Ray interconnect framework is not configured
> > >>
> > >>bash-3.00# ifconfig -a
> > >>lo0:
> > flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
> > >>8232 index 1
> > >> inet 127.0.0.1 netmask ff000000
> > >>ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu
> > 1500 index 2
> > >> inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
> > >> ether 0:3:ba:9b:47:dd
> > >>ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4>
> > mtu 1500 index 2
> > >> inet 192.168.252.1 netmask ffffff00 broadcast
> > 192.168.252.255
> > >>ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu
> > 1500 index 4
> > >> inet 192.168.129.2 netmask ffffff00 broadcast
> > 192.168.129.255
> > >> ether 0:3:ba:9b:47:dd
> > >
> > > _______________________________________________
> > > SunRay-Users mailing list
> > > [email protected]
> > > http://www.filibeto.org/mailman/listinfo/sunray-users
> > _______________________________________________
> > SunRay-Users mailing list
> > [email protected]
> > http://www.filibeto.org/mailman/listinfo/sunray-users
> >
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
>
----------------------------------------
Dr Thierry DELAITRE
Systems and Services Manager, CSCS
University of Westminster
115 New Cavendish Street, London W1W 6UW
Tel: 020 7911 5000 ext: 3586
Fax: 020 7911 5089
Mobile short dial code 1788
http://www.cscs.wmin.ac.uk/~delaitt
----------------------------------------
This e-mail and its attachments are intended for the above named only
and may be confidential. If they have come to you in error you must
not copy or show them to anyone, nor should you take any action based
on them, other than to notify the error by replying to the sender.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
