You can get the version from a firmware image like this:
% /opt/SUNWut/sbin/lzd < /tmp/CoronaP7 | /usr/ccs/bin/what | grep version=
ic 303033 oc 621692
version=CoronaP7-3.1_21,REV=2005.06.09.19.01
%
This is actually documented in utfwadm(1M)
~D..
James Cuff wrote on 09/02/05 07:14 AM:
Magic - thanks Paul, that did the trick! My set up is somewhat twisted in
that the dhcp server is on another box, and it's all running on non
supported what nots. It's an evil mixture of gentoo, redhat and solaris
fetching bits from here and there and everywhere for tftp and dhcp etc.
So the utfwadm command was what I needed, I've never seen that one
before, as everything has been hacked together by hand before now.
If it is of any help the version string came out to be:
3.1_21,REV=2005.06.09.19.01
The flash worked correctly, and the DTU came up with the new version just
fine, as I can see in the logs, when the DTU restarted:
{terminalIPA=192.168.1.114, type=pseudo,
fw=3.1_21,REV=2005.06.09.19.01,Boot:1.4; 2000.07.20-14:34:45-BST,
However no joy on the wheel mouse front, never mind. It was worth a try.
Otto, anything else you would like me to test on the mouse side of things?
Best,
j.
On Fri, 2 Sep 2005, Paul Shore wrote:
James,
Take a look at the utfwadm command. This will allow you to copy in a
new firmware file. The command handles putting it into the /tftpboot
structure and updating the Sun Ray servers DHCP configuration entries.
For example, if a have a new firmware file "beta3.1-P2" in /tmp and
wanted to update the firmware for just a single terminal on a shared
192.168.1.0 subnet, I would run:
utfwadm -A -f /tmp/beta3.1-P2 -e 080020f5aa36 -N 192.168.1.0
Paul
On 02/09/05, James Cuff <[EMAIL PROTECTED]> wrote:
Hi folk, [just finished with the iTunes and gin (ahem) :-)]
So, my earlier post about wheely mice, and Otto's great reply made me dig
out the new 3.1beta, but a few strings|grep|whatever have not helped
me out so much.
Anyone know what I ought to put in "option SunRay.NewTVer" for dhcpd.conf
to take the new CoronaP3 firmware from the 3.1 beta correctly?
I just don't fancy upgrading the whole shooting match on the server (as
you saw in my last post, the 150 is pretty much part of the family), I
just want to try out the new DTU firmware to see if that bloody wheel
works, as I did by hand for the last patch:
NOTE: The DTU firmware delivered in this patch has the following version
identification string
3.0_118979-01_2005.05.25.15.17
But I just can't seem to find it in the beta. I did force it with the
wrong params and get the 150 DTU to fetch it via tftp:
Sep 1 23:39:09 douglas in.tftpd[26653]: RRQ from 192.168.1.114 filename
CoronaP3.080020F0B9F5
but, no wheel... so I think I must have the wrong NewTVer string.
Best regards,
J.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
