hello all, srss 3.0 patch 118979-02 has been released. you can download the patch directly from the list web page:
download patch 118979-02: http://www.filibeto.org/sun/sunray-users/patches/3.0/sparc/118979-02.zip download signed patch 118979-02: http://www.filibeto.org/sun/sunray-users/patches/3.0/sparc/118979-02.jar or from sunsolve: http://sunsolve.sun.com/pub-cgi/show.pl?target=patchpage the README is available online at: http://www.filibeto.org/sun/sunray-users/patches/README/README.118979-02 the LEGAL_LICENSE.TXT (Sun's ENTITLEMENT for SOFTWARE) is available at: http://www.filibeto.org/sun/sunray-users/patches/README/LEGAL_LICENSE.TXT Patch-ID# 118979-02 NOTE: *********************************************************************** READ THE TERMS OF THE AGREEMENT ("AGREEMENT") IN THE LEGAL_LICENSE.TXT FILE CAREFULLY BEFORE USING THIS SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS, PROMPTLY DESTROY THE UNUSED SOFTWARE. *********************************************************************** Keywords: sun ray update patch security Synopsis: Sun Ray Core Services version 3.0 Patch Update Date: Dec/13/2005 Install Requirements: Reboot after installation, an alternative may be in Special Install Instructions Solaris Release: 8 9 SunOS Release: 5.8 5.9 Unbundled Product: Sun Ray Core Services Unbundled Release: 3.0 Xref: Topic: Relevant Architectures: sparc BugId's fixed with this patch: 4818663 4950642 5092486 6189847 6190711 6199882 6203451 6203630 6205407 6207996 6211438 6212211 6213562 6218260 6223797 6225835 6226501 6228580 6230062 6230157 6238984 6240497 6242160 6245587 6253785 6259230 6263842 6266420 6275880 6278092 6296051 6296978 6300477 6309580 6309587 6309589 6310241 6310253 6310254 6311482 6319180 6325171 6346040 Changes incorporated in this version: 6319180 6238984 6263842 6266420 6278092 6275880 6259230 6296978 6325171 6346040 4950642 6300477 6309587 6309589 6309580 6310241 6310253 6310254 6311482 4818663 6296051 Patches accumulated and obsoleted by this patch: Patches which conflict with this patch: Patches required with this patch: Obsoleted by: Files included with this patch: /etc/init.d/utacleanup /etc/opt/SUNWut/smartcard/Belgian-eID.cfg /etc/opt/SUNWut/smartcard/Cryptoflex.cfg /etc/opt/SUNWut/smartcard/DatakeyModel330SafeNet.cfg /etc/opt/SUNWut/smartcard/FCU.cfg /etc/opt/SUNWut/smartcard/ORGA-Micardo.cfg /etc/opt/SUNWut/smartcard/probe_order.conf /opt/SUNWut/bin/utwho /opt/SUNWut/bin/utxconfig /opt/SUNWut/cgi-bin/ade /opt/SUNWut/cgi-bin/admincgi /opt/SUNWut/cgi-bin/copyright /opt/SUNWut/cgi-bin/crypto /opt/SUNWut/cgi-bin/desktop /opt/SUNWut/cgi-bin/error /opt/SUNWut/cgi-bin/gstatus /opt/SUNWut/cgi-bin/log /opt/SUNWut/cgi-bin/main /opt/SUNWut/cgi-bin/mhstatus /opt/SUNWut/cgi-bin/nav /opt/SUNWut/cgi-bin/smartcard /opt/SUNWut/cgi-bin/start /opt/SUNWut/cgi-bin/status /opt/SUNWut/cgi-bin/usb /opt/SUNWut/cgi-bin/user /opt/SUNWut/cgi-bin/usersession /opt/SUNWut/lib/firmware/CoronaP1 /opt/SUNWut/lib/firmware/CoronaP2 /opt/SUNWut/lib/firmware/CoronaP3 /opt/SUNWut/lib/firmware/CoronaP4 /opt/SUNWut/lib/firmware/CoronaP5 /opt/SUNWut/lib/firmware/CoronaP6 /opt/SUNWut/lib/firmware/CoronaP7 /opt/SUNWut/lib/guloginGUI /opt/SUNWut/lib/libutjadmin.so /opt/SUNWut/lib/libutsmon.so.1 /opt/SUNWut/lib/locale/html/main/replace.html /opt/SUNWut/lib/locale/html/nav.html /opt/SUNWut/lib/locale/html/start/start.html /opt/SUNWut/lib/nscloginGUI /opt/SUNWut/lib/scloginGUI /opt/SUNWut/lib/utdomount /opt/SUNWut/lib/utparalleld /opt/SUNWut/lib/utseriald /opt/SUNWut/lib/utstoraged /opt/SUNWut/lib/utxinit /opt/SUNWut/sbin/utcard /opt/SUNWut/sbin/utdesktop /opt/SUNWut/sbin/utfwadm /opt/SUNWut/sbin/utfwload /opt/SUNWut/sbin/utmhadm /opt/SUNWut/sbin/utuser /usr/dt/config/Xsession.d/0100.SUNWut /usr/kernel/drv/sparcv9/utdisk /usr/kernel/drv/sparcv9/utdiskctl /usr/kernel/drv/utdisk /usr/kernel/drv/utdiskctl /usr/openwin/server/modules/ddxSUNWsunray.so.1 Problem Description: 6319180 utxconfig is insufficently paranoid 6238984 utseriald dumps core after resetting the DTU connected with serial adapter 6263842 Session is stuck at the grey screen sometimes 6266420 SRSS 3.0 USB printing don't work on Solaris 9 (9/04) and JavaDS 2 (utparalleld problem?) 6278092 Sun Ray doesn't print with HP Laserjet 1320 attached via USB to the Sun Ray 6275880 utfwadm fails on non-english locales with "Error: Improper firmware file" 6259230 New Quatech SSU-100 devices (P/N 990-0044-01D) don't work on Sun Rays 6296978 horizontal dotted lines are displayed as solid lines on FrameMaker 7.1 with SRSS 3.0 6325171 ndbm database corruption causes utdesktop and authd to core dump. 6346040 Update smartcard config files to work with new versions of cards 4950642 Sun Ray web GUI should reduce volume of logfile output 6300477 Unlocalized messages for "Add user" in AdminGUI 6309587 Error message page is observed during add user of admin GUI using token reader 6309589 Blank page is observed when deleting/updating user from admin GUI 6309580 Trying to restart services from Admin GUI gives error. 6310241 Viewing added smartcards through "view" link of admin GUI gives error page 6310253 Error page is displayed when tried to view the multihead group from Admin GUI 6310254 View by server gives error page from admin GUI in a HA group 6311482 Restart of Sun Ray services from Admin GUI using netscape7 is not working as expected 4818663 utxlock should not be enabled for CAM sessions 6296051 some filesystems on Sun Ray disks are mounted with setuid enabled (from 118979-01) 6218260 Scroll wheel on Genius NetScroll and PowerScroll mice is not recognised 6213562 Scroll wheel on Logitech M-BJ58 mouse is not recognised 6226501 Scroll wheel on Logitech M-BT85 Click! optical wheel mice is not recognised 6228580 Scroll wheel on Fujitsu PID==0x1001 mouse is not recognised 6199882 DTU rx buffer management deadlocks if input queue grows too large 6203630 USB printing fails with some USB printers 6212211 SunRay The position of the mouse pointer is random on xinerama displays 6190711 Mouse cursor is lost in Xinerama when video is played in enlarged realplayer 5092486 Mouse pointer tracking is not stable under stress in multihead 6223797 Setting router equal to Sun Ray's IP address should invoke proxy ARP 6203451 utwho/utfwload fail in en_US.ISO8859-1 locale because final join doesn't work 6240497 SRSS 3.0 firmware ignores DHCP option 49 when DHCP_INFORM is not received. 6230062 Sun Ray 170 should support multiple resolutions 6225835 yuv transformation underflows on black pixels 6242160 Xsun's footprint quickly soares to over 2GB when Cadence on sunray is used and then it crashes 6253785 T=1 smartcard works on first insertion but not again unless DTU is power cycled or Ctrl+Moon. 6211438 When utselecting with SRSS 3.0, the target system loses control of keyboard and sometimes mouse 6245587 utcard for not being able to remove partially configured card. 6189847 With "pam_sunray.so" in the PAM stack kerberos credential generation fails 6205407 system panics when utdisk module is unloaded after utdiskctl module is unloaded 6207996 mass storage kernel drivers incorrectly assume that attach(9E) occurs before open(9E) 6230157 utstorage message queue handling is broken Patch Installation Instructions: -------------------------------- For Solaris 8 and later release, refer to the man pages for instructions on using 'patchadd' and 'patchrm' scripts provided with Solaris. Any other special or non-generic installation instructions should be described below as special instructions. The following example installs a patch to a standalone machine: example# patchadd /var/spool/patch/<patchid-rev> The following example removes a patch from a standalone system: example# patchrm <patchid-rev> For additional examples please see the appropriate man pages. Special Install Instructions: ----------------------------- NOTE: This patch is for the Sun Ray Core Services 3.0 component that is part of Sun Ray Server Software 3.0. NOTE: This SRSS patch does not support Live Upgrade. Please do not install this patch via live upgrade. NOTE: The DTU firmware delivered in this patch has the following version identification string 3.0_118979-02_2005.11.28.11.24 Required Patches ---------------- Warnings & Errors ----------------- ** WARNING: This patch should only be applied to systems which have Sun Ray Server Software 3.0 fully installed. Do not attempt to add this patch to the UFS image to be applied as part of the install process ** Detailed Steps -------------- 1. Suppress firmware downloads If the server being patched is not a member of a Sun Ray failover group you should skip this step. If the server being patched is a member of a Sun Ray failover group then this step is optional but is strongly recommended. At Patch Installation --------------------- Before adding this patch to servers configured into a Sun Ray failover group we advise that you disable Sun Ray firmware delivery from all unpatched hosts in the failover group. On each host in the group: For each of the dedicated network interconnects: $ /opt/SUNWut/sbin/utfwadm -a -D -n <intf> For each of the shared subnetwork interconnects: $ /opt/SUNWut/sbin/utfwadm -a -D -N <subnetwork> Do this only one time, before adding this patch to any server in the group. The purpose of this step is to prevent unpatched servers from offering old firmware to Sun Ray appliances. At Patch Removal ---------------- Before removing this patch from servers configured into a Sun Ray failover group we advise that you disable firmware delivery from any hosts in the failover group that have this patch installed. On each already-patched host in the group: For each of the dedicated network interconnects: $ /opt/SUNWut/sbin/utfwadm -a -D -n <intf> For each of the shared subnetwork interconnects: $ /opt/SUNWut/sbin/utfwadm -a -D -N <subnetwork> Do this only one time, before removing this patch from any of the already-patched servers in the group. The purpose of this step is to prevent already-patched servers from offering new firmware to Sun Ray appliances. If this patch is being removed from a Sun Ray failover group then omitting this step may result in increased restart times for your Sun Ray appliances. (A mixture of patched and unpatched servers advertising conflicting firmware versions may cause the appliance to download new firmware each time it restarts. The appliance automatically restarts itself after downloading fresh firmware so its overall restart cycle is longer in that case. The appliance may restart itself several times before establishing or reconnecting to a session.) The Sun Ray restart time will return to normal once the patch has been removed from all servers in the failover group. 2. Stopping Sun Ray services and login sessions Before the addition or removal of this patch to a Sun Ray server all users should be logged out of their Sun Ray sessions. Stop the Sun Ray services using the following commands: $ /etc/init.d/utstorage stop $ /etc/init.d/utsvc stop These commands will terminate any Sun Ray sessions that were not already logged out. Next, use the instructions outlined above in the section "Patch Installation Instructions" for the addition or removal of this patch. Adding the patch automatically prepares the server to advertise new firmware to your Sun Ray appliances. Removing the patch automatically prepares the server to revert to advertising pre-patch firmware to your Sun Ray appliances. 3. Rebooting the Sun Ray server The Sun Ray server must be rebooted after the addition or removal of the patch. 4. Enable firmware downloads After the addition or removal of this patch on all Sun Ray servers in a failover group, enable firmware downloads using one of the following methods: 1) If all Sun Ray server in the failover group provides firmware downloads run this command on one of the servers: $ /opt/SUNWut/sbin/utfwsync After which the Sun Ray DTU's will reboot themselves and load the new firmware. 2) If only some of the Sun Ray servers in the failover group provide firmware downloads to the DTU's, run the following command on the servers that do provide firmware: For each in dedicated network interconnects: $ /opt/SUNWut/sbin/utfwadm -a -A -n <intf> For each in shared subnetwork interconnects: $ /opt/SUNWut/sbin/utfwadm -a -A -N <subnetwork> Then restart services on all servers in the failover group by executing the following command on a server in the group: $ /opt/SUNWut/sbin/utfwsync -d README -- Last modified date: Tuesday, December 13, 2005 _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
