On 4/4/06, {Darkavich} <[EMAIL PROTECTED]> wrote:
> On Apr 4, 2006, at 7:19 AM, Kevin wrote:
>> i'm trying to configure Active/Standby failover with IPMP.
>> however i'm worry about virtual interface,
>> is it possable to use virtual interface for SunRay conneting ??Sun Ray tries very hard to ignore virtual interfaces. IPMP can work, but it only works properly if you arrange to use "physical" interfaces for data transfer and use virtual interfaces for IPMP test addresses. > I am using this with no problem. Here is my configuration: > > > sr-san-19:smisrack [103]egrep sr-san-19 /etc/hosts > 10.43.12.92 sr-san-19-bge0 sr-san-19-pri > 10.43.12.93 sr-san-19-bge1 sr-san-19-sec > 10.43.12.91 sr-san-19 > > > sr-san-19:smisrack [105]egrep sr-san-19 /etc/hostname.bge? > /etc/hostname.bge0:sr-san-19-bge0 netmask + broadcast + -failover deprecated > up group qualnet addif sr-san-19 netmask + broadcast + failover up > /etc/hostname.bge1:sr-san-19-bge1 netmask + broadcast + -failover deprecated > standby up group qualnet On a standalone server this configuration can work, more or less by accident. In a failover group it could appear to work but it wouldn't really be working in the way in which you intended. It would appear to work only because of a bug (6399233) and when that bug gets fixed this configuration will fail. If IPMP in a failover group is important to you then you should open a support call against RFE 6405408 and get its priority increased. OttoM. __ ottomeister Disclaimer: These are my opinions. I do not speak for my employer. _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
