Craig, I did utinstall from the very first time, but it was somehow corrupted. As you can imagine, i didn't change any package information myself just to enjoy :). And the solaris installation is working fine since november, so i think it is healthy. I think something simply didn't work on the first time i launched utinstall, and that created all the problems then. I just wanted to write it here, in case somebody has the same problem. But of course if you think it was a bad idea i think some of the admins can delete my message at all. About CAM, i added applications without any problem (I wrote "With the card, i see a totally dark blue screen with a menu with allowed applications" because i added my applications already). And yes, i read all the admin guide, but uh no pictures are there about it should look like now, that's why i asked.
Any answer to question (2) ? Thanks again ps: it is a full installation of solaris Craig Bender ha scritto: > Doesn't sound like you had a healthy Solaris server to begin with. We > recommend the minimum update versions of Solaris in the admin guide, > and we always recommend that you do a full install of Solaris. > > You do know that the proper way to install Sun Ray server is to use > the utinstall script, correct? Once you download the zip file, you > unzipped, cd srss_3.1 and run utinstall. It doesn't sound like you did > that if you were doing a bunch of package adds, package removes. > > You have to define that you want to run CAM when you first run > utconfig. If you don't do it, then yes you have to utconfig -u, then > rerun utconfig. > What your seeing now is CAM with no applications defined. Have you > read the admin guide at all? > > You can see a lot of CAM examples here: > http://blogs.sun.com/roller/page/ThinkThin > > > Davide Marche wrote: >> Hi everybody, >> >> I managed to do it, so I am writing it here. Hopefully it will help >> smb else, althought I think it's quite obvious for the rest of the >> list :) >> First of all, i have to say that the biggest problem is to have a >> properly installed sun ray server (at least in my case). I had to >> work a lot with packages and pgkadd and pkgrm to make it work. In my >> case, pkginfo was corrupted for some of the packages of the srss, i >> had to remove them by hand and reinstall them, and then install the >> whole software once again. Then, i had to unconfig the srss and >> config it again, with CAM enabled. Just a hint: it will work only >> when everything in the setup was ok, even without warnings (this is >> quite strange actually, warnings prevented the software from working >> in my case, but that's it). >> Now I am in this situation: no dtlogin is asked, and only card user >> are allowed to use the client. With the card, i see a totally dark >> blue screen with a menu with allowed applications, and I have a >> couple of questions for sunray's guru: >> >> 1. is it supposed to be so ? :) >> 2. is there any way to decide which applications are enabled only >> for some cards or some group(s) of them? I don't need a very >> good control of it, basic controls will be more than enough >> >> Thanks and hope this message can help. >> >> D. >> >> >> >> Davide Marche ha scritto: >>> Hi, >>> >>> I managed to setup CAM reinstalling the software, now utconfig asks >>> me if i want to enable it or not, and then i can see the options >>> from the admin gui. The problem is that the thin client now doesn't >>> want to work anymore, but I did all this very fast yesterday so i >>> think i did something wrong, i will try again later or on monday. If >>> i find a solution i will make you know about it. >>> >>> D. >>> >>> MOULINE Kamal ha scritto: >>>> sorry i use srss_3.1 >>>> Kamal >>>> >>>> MOULINE Kamal a écrit : >>>>> Hi David, >>>>> >>>>> me too I want to do that but still not have any idea how !!! I >>>>> don't know if we should have another soft or it's possible with >>>>> srss_1.1 ?? >>>>> >>>>> regards, >>>>> Kamal >>>>> >>>>> Davide Marche a écrit : >>>>>> Hi Mouline, >>>>>> >>>>>> thank you :) actually i did it time ago but there was some other >>>>>> problem. I found out that it was not working because the thin >>>>>> client was >>>>>> also the token reader (and now i can say: i was quite stupid of >>>>>> me not >>>>>> to think about it before). Now i have another question (maybe i will >>>>>> find it out myself again, but i am not so optimistic this time). >>>>>> It seems that some of the boss saw (somewhere and somewhen) a thin >>>>>> client authenticating users with just a smart card (that means, >>>>>> without >>>>>> dtlogin) and allowed different applications for different users >>>>>> (which >>>>>> is card here) and probably different desktops. Now i am having a >>>>>> look at >>>>>> CAM, but the first problem is that the admin guide shows me an >>>>>> option in >>>>>> the gui that i don't have (admin->policy->Controlled access >>>>>> mode). But >>>>>> mostly i need to know if i am in the wrong way or not, because if >>>>>> i am >>>>>> in the right i think i can find a way to make it work somehow :) >>>>>> >>>>>> thanks again to all the list :) >>>>>> >>>>>> Davide >>>>>> >>>>>> ps: i am using SRSS 3.1, if it helps :) >>>>>> >>>>>> MOULINE Kamal ha scritto: >>>>>> >>>>>>> Hi David, >>>>>>> >>>>>>> You have to register the smart card in order to have the sun ray >>>>>>> server to know it, you can do that by checking the options: let >>>>>>> users >>>>>>> register the smart card, you can have all the procedure on the >>>>>>> sun ray >>>>>>> admin guide. >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> =========================================== >>>>>>> MOULINE Kamal >>>>>>> Ingénieur consultant >>>>>>> CBI - www.cbi.ma >>>>>>> Divisions Informatique Grands Comptes >>>>>>> GSM : +212 63 47 55 88 >>>>>>> STD : +212 22 43 71 21 >>>>>>> FAX : +212 22 43 71 84 =========================================== >>>>>>> >>>>>>> >>>>>>> >>>>>>> Davide Marche a écrit : >>>>>>> >>>>>>>> Hi everybody, >>>>>>>> >>>>>>>> I have some questions about the smart card usage. I have a thin >>>>>>>> client >>>>>>>> 1G and a sun ray server running on solaris 10. I am trying to >>>>>>>> restrict >>>>>>>> usage of the client only to users with smart card, so i went to >>>>>>>> the >>>>>>>> Admin gui -> Admin -> Policy and decide the policy (Users with >>>>>>>> card: >>>>>>>> registered users ; non card users: no access). The problem is >>>>>>>> that when >>>>>>>> I do so the thin client doesn't work at all, and shows me an >>>>>>>> image, I >>>>>>>> think it wants the smart card :) But of course the smart card >>>>>>>> is already >>>>>>>> in the thin client. I also added all the avaible cards from the >>>>>>>> "smart >>>>>>>> card" menu, but it still doesn't work (I don't know exactly >>>>>>>> which card i >>>>>>>> have because they bought them when i was not working in the >>>>>>>> company yet, >>>>>>>> but i can describe them if necessary). I also have some other >>>>>>>> questions, >>>>>>>> but this one is no doubt the most important for me now because >>>>>>>> i got >>>>>>>> this task unexpected and don't really know much about the thin >>>>>>>> client >>>>>>>> itself :( >>>>>>>> Hope somebody can help me at least with hints or links, >>>>>>>> everything will >>>>>>>> be a good starting point for me now :) >>>>>>>> >>>>>>>> Thanks in advance >>>>>>>> >>>>>>>> Davide >>>>>>>> _______________________________________________ >>>>>>>> SunRay-Users mailing list >>>>>>>> [email protected] >>>>>>>> http://www.filibeto.org/mailman/listinfo/sunray-users >>>>>>>> >>>>>>>> >>>>>>> >>>>>> _______________________________________________ >>>>>> SunRay-Users mailing list >>>>>> [email protected] >>>>>> http://www.filibeto.org/mailman/listinfo/sunray-users >>>>>> >>>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> _______________________________________________ >>>>> SunRay-Users mailing list >>>>> [email protected] >>>>> http://www.filibeto.org/mailman/listinfo/sunray-users >>>>> >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> _______________________________________________ >>>> SunRay-Users mailing list >>>> [email protected] >>>> http://www.filibeto.org/mailman/listinfo/sunray-users >>>> >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> No virus found in this incoming message. >>>> Checked by AVG Free Edition. >>>> Version: 7.1.394 / Virus Database: 268.8.3/358 - Release Date: >>>> 07/06/2006 >>>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> SunRay-Users mailing list >>> [email protected] >>> http://www.filibeto.org/mailman/listinfo/sunray-users >>> >>> ------------------------------------------------------------------------ >>> >>> >>> No virus found in this incoming message. >>> Checked by AVG Free Edition. >>> Version: 7.1.394 / Virus Database: 268.8.3/359 - Release Date: >>> 08/06/2006 >>> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> SunRay-Users mailing list >> [email protected] >> http://www.filibeto.org/mailman/listinfo/sunray-users >> > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users > > > _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
