> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Doolittle > Sent: Thursday, February 22, 2007 3:05 PM > To: SunRay-Users mailing list > Subject: Re: [SunRay-Users] Utselect between solaris and > linux not working > > It certainly looks to me like your network is flaky. > Hopefully it's an artifact tickled by the multicast > functionality, which will resolve itself once you change to > broadcast... > > -Bob >
I unconfigured the sunray services on ndssr01 'utadm -r' and 'utconfig -u' and reran the 'utconfig' and 'utadm -a hme0' and still no 'U' between ndssr01 and pablo/skb-linux. I went ahead and upgraded to SRSS 3.1 on ndssr01 and it still wouldn't see skb-linux or pablo on the 192.1681.32.0 network with utgstatus. I physically moved pablo into the same room where ndssr01 is located, physically connected ndssr01 and pablo (192.168.132.0) via a crossover cable and got the 'U' between the two. Then I connected both to a 5-port linksys switch and used the 192.168.132.0 network to uplink it to the rest of the network. I was able to switch between the ndssr01 and pablo on the sunray's after that. Still couldn't see 'U' for skb-linux which is still in another room. Definitely a network issue. I assumed because the auth.props has enableMulticast=true commented out, that that implies enableMulticast=false. But not the case. I explicitly set enableMulticast=false on all three and now ALL computers see and switch between each other. Thanks for all your help Bob, OttoM, and Craig!! On to the next issue in another email to come. Suzie _______________________________________________ SunRay-Users mailing list [email protected] http://node1.filibeto.org/mailman/listinfo/sunray-users
