Tom Stanley wrote:
I have an old Sun Ray 1 that I plugged into our network. I am running
Sun Ray Server 3.1 with 120880-06. The Sun Ray 1 has very old
firmware--I get an hourglass icon when I power it on. It draws two
lines under the hourglass indicating it started up and has a network
connection. It is not getting an IP address. When I snoop the network
for its MAC address I see repeated DHCP Discover requests.
DHCP is handled by a Windows 2000 server on our net and has never been
a problem before. I am wondering if the old firmware in this Sun Ray
has to get its IP info directly from a Sun Ray Server since it
probably expects a dedicated network?
Yes. If it is older than 2.0 firmware then it won't support DHCPINFORM
request
and it should get all the parameters from DHCPREQUEST. It will work if
you provide
IP addresses from Sun Ray server.
Thanks
P.S.M.Swamiji
Note:These are my personal opinions,nothing to do with my employer
I tried using utadm -A to add our network and have the SRS hand out
the vendor specific info, but that didn't help.
Any ideas for getting this on the network and upgraded? Thanks.
-Tom Stanley
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
