Hi Bob,
The 'utxconfig -a -r 1024x768' command does not work properly. Most of the
time it will try to set the highest possible resolution on a monitor. For
instance, it will use 1280x1024 on a 17" CRT most of the time. Users have a
hard time trying to read even after setting the biggest font size possible.
So, I had to use 'utxconfig -r 1024x768' to absolutely fix the screen
resolution. No matter what monitor type & size you have, you are fixed to
1024x768.
If I had a big screen connected to a DTU, can I make that DTU use a higher
resolution without affecting others?
I am using windows_connector CAM script. How do I use this "then
$SUN_SUNRAY_TOKEN represents the DTU's MAC address
(e.g. pseudo.08002024986f)." command? Before my uttsc command? Do I use "if
then else" i.e. if $SUN_SUNRAY_TOKEN = pseudo.08002024986f, run uttsc -r
sound:low, else uttsc -r sound:off or something like that?
Thanks.
Regards,
Alan
Bob Doolittle
<Robert.Doolittle
@Sun.COM> To
Sent by: SunRay-Users mailing list
sunray-users-boun <[email protected]>
[EMAIL PROTECTED] cc
Subject
22/08/2007 23:21 Re: [SunRay-Users] Windows
Connector CAM script for specific
user or DTU?
Please respond to
SunRay-Users
mailing list
<[EMAIL PROTECTED]
ibeto.org>
The best way to handle setting the resolution for everyone is to
simply, as root, run 'utxconfig -a -r 1024x768'. That will set
a system default resolution. You only need to run it once.
If you want to control sound by user, use
$SUN_SUNRAY_TOKEN to detect the particular users
you want to turn sound on for.
If you're using cards, then $SUN_SUNRAY_TOKEN will be
the card CUID. If you're not using cards, and haven't enabled
NSCM policy (you probably didn't if you're using CAM), then
$SUN_SUNRAY_TOKEN represents the DTU's MAC address
(e.g. pseudo.08002024986f).
-Bob
[EMAIL PROTECTED] wrote:
> Hi,
>
> I have a general/globe windows connector CAM script that calls uttsc.
Something like this:
> /opt/SUNWut/bin/utxconfig -r '1024x768'
> /opt/SUNWuttsc/bin/uttsc -mb -D fullwindowdrag -D menuanimations -D
theming\
> -D cursorshadow -D cursorsettings -r sound:off -r disk:usbdisk=$HOME
${VMHOST}
>
> So with this setting, everybody is not getting sound, resolution is fixed
at 1024x768, etc.
> If I let some users with their assigned DTU to have sound i.e. turn on
audio redirection (-r sound:on),
> how can I do this? Something like if match 5 DTU's MAC address do this,
else use the generic uttsc?
>
> Thanks for the help.
>
> Regards,
> Alan
>
>
>
>
>
********************************************************************************
>
> IMPORTANT NOTICE: This email and any files transmitted with it is
> intended only for the use of the person(s) to whom it is addressed, and
> may contain information that is privileged, confidential and exempt from
> disclosure under applicable law. If you are not the intended recipient,
> please immediately notify the sender and delete the email. Thank you.
>
********************************************************************************
>
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
>
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
***************************************************************************
IMPORTANT NOTICE:
This email and any files transmitted with it is intended only for
the use of the person(s) to whom it is addressed, and may
contain information that is privileged, confidential and exempt
from disclosure under applicable law. If you are not the intended
recipient, please immediately notify the sender and delete
the email. Thank you.
***************************************************************************
********************************************************************************
IMPORTANT NOTICE: This email and any files transmitted with it is
intended only for the use of the person(s) to whom it is addressed, and
may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete the email. Thank you.
********************************************************************************
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
