Hi Swamiji and Mark,
Thank you for your fast respond.
Let me clarify myself about Sun Ray failover setup. So for Server A,
when i execute utconfig, i have to say YES to "Whether you want to
configure for a failover group" ? and also create the signature....
After 6 months, when Server B available, i have to setup the failover
with the same signature as above and also use the utreplica command...
Thanks in advance.
--
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.
Swamiji Wrote:
First just configure single SRSS server and once the new server came
then configure FOG.
i.e
1. Install SRSS on existing Server say A & reboot
2. Run utconfig
3. Run utadm
After 6 months say you got the server B do the following steps:
1. Install SRSS on new server B & reboot
2. Run utconfig ( select admin password & groupsignature as same as
server A )
3. Run utadm
4. Run utreplica -p serverB on serverA
5. Run utreplica -s serverA on serverB
Done . Now you have a FOG with serverA & serverB :-) .
THanks
P.S.M.Swamiji
Note:These are my personal opinions,nothing to do with my employer
Mark Cosens Wrote:
should be fine.
configure the 1st one as normal & configure a failover password.
When you add the second one, build it to the same level as the original,
then on the the 1st run :-
utreplica -p secondary
& on the 2nd
utreplica -s primary
This will sync the original datastore onto the new server.
Mark Cosens
Professional Services Consultant
e: [EMAIL PROTECTED]
UKN Group Limited
Stratfield House, Riseley Business Park , Reading , Berkshire , RG7 1QF
d: +44 (0) 118 988 1200, t: +44 (0) 118 988 1200
f: +44 (0) 118 988 1201
London (City)
t: +44 (0) 207 831 1008, f: +44 (0) 203 206 0148
Visit us at http://www.ukngroup.com/
Mohamed Ali Wrote:
Dear forum users,
My management asked me to setup and configure 2x SRSS in a failover
group. Due to budget reason, they asked me to install and configure 1x
SRSS and later after 6 month or at the end of the year, they will
purchase a server and will ask me to configure as Secondary server in
SRSS failover group.
How the above case be possible. Any advise is appreciated.
FYI, last year i have setup 2x Sun Ray servers in a failover group in
one shot. But the above case is different.
Thanks.
Yours Sincerely,
Mohamed Ali Bin Abdullah.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
