Hello,
If this full screen problem is the usual one were the user logs in
on the 17" screen and then moves the session to a 15" screen,
with lower resolution there is not much you can do unless you FORCE
both screens to display with the SAME LOW resolution with
utxconfig(1)
/opt/SUNWut/sbin/utxconfig -r 1024x768 -t token
Token is the Sun Ray SMARTCARD-ID
You find a users TOKEN with the utwho(1) command
You need to know which resolution can be displayed by both screens
! 1024x768 should work
but if the 15" screens are old its possible that they only can run
800x600 pixels.
I dont use any USB CD-Drives so i dont know about them, Its unlikely
that
they will be effective due to the fact that they will be LAN connected
over
100 Mbit ethernet ( 8 MegaBytes per second , best case )
There are no external CD Drives listed here:
http://www.sun.com/io_technologies/sunray/sunray1.html
There are lots of external CD drives here :
http://www.sun.com/io_technologies/usb/USB7.html
so why are they not usable on a Sun Ray ?
its libusb that does the job in both attach senarios isn't it ?
//Lars
Haresh Ahuja wrote:
Hi,
We have a situation where the users are unable to view full screen on
15" monitors. In the same environment, users are able to view properly
on a 17" monitor.
Also, the users have a need to connect external CD drive on the local
USB ports.
Please help us.
With regards
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
