Well,I don't know what we are doing wrong. This is the debug from the Cisco router:
Checking IPSec proposal 1 .Oct 16 16:41:44.544: ISAKMP: transform 1, ESP_AES .Oct 16 16:41:44.544: ISAKMP: attributes in transform: .Oct 16 16:41:44.544: ISAKMP: SA life type in seconds .Oct 16 16:41:44.544: ISAKMP: SA life duration (basic) of 28800 .Oct 16 16:41:44.544: ISAKMP: encaps is 61443 (Tunnel-UDP) .Oct 16 16:41:44.544: ISAKMP: key length is 128 .Oct 16 16:41:44.544: ISAKMP: authenticator is HMAC-SHA Then she stops and the SunRay DTU stops at PH2 quick I msg1 Does anyone have a sample Cisco config or advice on what is wrong with my ISAKMP setup? On 10/15/07, Kent Peacock <[EMAIL PROTECTED]> wrote: > Jimmy Fox wrote On 10/15/07 02:36 PM,: > > Is there documentation on this in the SRSS admin manual? > > There is a section on configuring the VPN parameters, though not much on > configuring the gateway side. What is implemented is *exactly* what the > Cisco software EzVPN client does. > > Kent > _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
