Hi all,
Myself and my co-worker have been beating our heads against a wall with this for about 2 days now. We're ready for some help. We're trying to get two solaris 10 boxes, with SRSS 4.0, to get into a working failover group. We had 3.1 working on these same two servers, but decided to upgrade to the 4.0. We upgraded the OS, and then we uninstalled the old run ray software and installed the new. We used the same packages for both servers, so we're certain we've got the same version of all the software. Both sunray's appear to be functioning independently, but they are not entering into full replication status. sr01 is our primary, sr02 is the secondary. We have two subnets configured under utadm for both servers, 192.168.0.165/27 (sr01), 192.168.0.130/26 network and a 192.168.1.18/29(sr01), 192.168.1.24/28(sr02) network. (I keep wondering if the different sizes on the subnets or using two separate subnets might be causing an issue, but we can't figure out how it would, since each server knows to contact the other on a specific ip address) utgstatus shows UA- for the server it is run on, -A- on the other server. both show TN on both servers. We can ping both servers from each other. both servers are listening on 7008-7012. utadm -l shows both servers and a broadcast address listed in the altauth key. Both have only themselves listed for the firmware server and the AuthSrvr. Everything else is identical. utauthd is running on both servers, using /etc/opt/SUNWut/jre/bin/java -client auth.utauthd.utauthd for a command. The admin password is the same on both (we've reset it a few times to make sure) group signature is the same on both, we've checked /etc/opt/SUWut/gmSignature to make sure. Running a utpulld on the secondary responds with utpulld: starting utpulld: terminating normally The auth_log on the secondary is showing "token query time out to host sr01 interface 192.168.0.21". Googling on that, we tried checking netstat -in (no errors) and utcapture (no errors), so as far as we can tell it's not a network issue... I'm totally out of ideas. What am I missing? Thanks! sean
_______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
