Hi everyone,
I use a Sun Ray 270 to connect to a local SR server. Now I want to also
use the 270 as a second monitor on my local workstation (which is not
the SR server). What I found is that if the SR server is running, all
is well. The source button on the 270 switches me back and forth
between monitor mode and SR mode and it works perfect. However, when I
power off the SR server I run into a problem. I can still use the
270's source button to put the 270 into monitor mode. But after about
or 2 minutes the 270 switches itself back to SR mode with the 27B
window floating around. I push the source button again and I'm back in
monitor mode for another minute or two. But it will again switch back
to SR mode for no apparent reason. If I fire up the SR server and then
put the 270 into monitor mode it will stay in monitor mode until I press
the source button or power off the SR server.
So how can I make the 270 stay in monitor mode when there is no SR
server running?
Thanks, Mike
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
