Thomas Mitzka <mitzka <at> bos-it.de> writes: > > Hi, > has anyone experience in Sun Ray over a WAN with a simple DSL connection? > We installed the new Sun Ray Server Software 4.1 beta on a Sun X4100 M2 > Server, installed the GUI-Firmware on a Sun-Ray, did the complete setup > for connecting the Ray-Server. > After powering on the Sun-Ray 2 <at> Home everything started fine und looks > good, but if we scroll too fast trough a Webpage the display becomes > cubically and it takes some time to "repaire" it. A look at utcapture > showed an unacceptable high package lost rate, almost over 30%. > My first idea was a too high MTU and so we tuned it down from 1500 to > 1460. It helped a little bit, the lost rate went down to 20% but this is > still unacceptable because the display becomes still cubically. > Hi Thomas,
As you're no doubt aware, 4.1 is still in beta, and some erratic behavior can still occur, so I would definitely still recommend version 4.0. When you said that adjusting your MTU helped a bit, I think you should move it down a bit more. On a cable modem line, I typically set my MTU to about 1320... on my Air card, I run my MTU all the way down to 1260. Also, depending on what web pages you are visting, the scrolling experience can vary widely. On sites that have animated banner ads, things can really slow down to a crawl. I hope this helps for you, Bob _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
