Hi,
I've got a bandwidth latency issue with a 270 at a very small
remote site when it is not in use.
At our HQ site we have a SRSS 09/07 box. This remote site is
connected to HQ via a private T1. There is a single sunray 2 at the
remote site and it has been perfectly fine. At this remote site there is
an auxiliary building that is connected to the main building with a
10baseT extender over 2 pair telephone wires, (this is pretty ghetto, I
know) and in this auxiliary building is a single 270.
When a card is inserted (we require smartcards) into the sunray
everything is fine, however when the sunray is not in use bandwidth
utilization on the T1 increases dramatically. Latency goes from ~130ms
to ~750ms. When you reinsert a card latency drops again to around
~130ms. Performance for the session is acceptable and comparable to the
sunray in the main building of the remote site. Via DHCP we have set the
MTU on the sunrays to 1250 which is just under what we can send over the
routers with out fragmentation.
I imagine that the problem is related to the extenders somehow
but I don't understand why, I especially do not understand why using the
sunray makes a difference. Think clients at this building do not cause
the latency issue.
So, anyone see anything like this before? Anything I might do to correct
it? I appreciate any help or advice.
Thanks, Isaac
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
