Hi, On Fri, 17 Oct 2008, Samuel Olampi wrote:
> What do you consider as the best practice when setting up SRSS in a > multi-NIC gigabit server ? > Take for instance the trusty V240 which has 4 Gb NICs. We have x4100/x4500 for sunray with 4 GE and cisco 6500 network devices -e1000g0 is in the vlan for the terminals. this vlan even not routed (no default gw, no router on thins lan). We use RFC1918 ip-s for this. -e1000g1 is for real the real word, with real ip-s, with router as default gw, etc -e1000g3 for the inter-server comm: NFS/LDAP between some x4100 and one x4500, some printers... this vlan isn't routed either. So, on server side, no visible vlan. In the network devices these lans are separated vlans. Bye, -=Lajbi=----------------------------------------------------------------- LAJBER Zoltan Szent Istvan Egyetem, Informatika Hivatal HTH=Hope This Helps, YMMV=Your Mileage May Vary, HAND=Have A Nice Day _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
