Gary:
While I do not profess to be a Sunray authority, I've done just that and
encountered no problems.
I was running about 30 Sunrays connected to an X4100 M2 on fully patched
Solaris 10 x86 5/08.
I did a Live Upgrade to Solaris 10 x86 10/08 (AKA u6) on another disk
partition followed by luactivate and an 'init 6' and the new Sunray
services seemed to start up just fine.
As soon as those came up, I fired up updatemanager and find that there
are 2 Sunray-related patches that need to be applied relative to the u6
disk images: One related to Sunray Kiosk mode (128166-01, I think) and
the other related to Sunray Core Services (127554-03).
Note: we've got a pretty minimal Sunray environment: we don't use Kiosk
mode, we use zero-administration mode for our Smart cards, we don't
connect to Windows terminal services, and we don't use FOG .... so I
can't claim that those things will just fire up immediately. But, at
the very least, basic Sunray Services seem to behave just fine after a
Live Upgrade to Solaris 10 10/08.
I hope that you are equally successful ....
John
I have an X4100 running Sun Ray Server 4.1 under Solaris 10 5/08.
If I do a Live Upgrade to Solaris 10 10/08, can I expect it to
still work?
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
