Hi,
I have upgraded the SRSS from V3.1 to V4.1 on a Solaris10 (5.10
Generic_137111-0) Sparc server and I have done the SunRay station
micro-programme update.
Now, the Sun Ray station receive an IP address via DHCP and stop before
the login screen, with the "26D" message.
When I perform a /opt/SUNWut/sbin/utquery -d 192.168.254.255 on the server:
terminalID=0003ba141c99
terminalIPA=192.168.254.130
model=CoronaP4
currentAuth=192.168.254.129
currentFW=4.1_50_2008.09.25.12.37
currentBarrier=325
currentBarrierLevel=325
currentMTU=1500
Subnet=255.255.255.224
Router=192.168.254.129
MTU=1500
Broadcst=192.168.254.159
LeaseTim=86400
DHCPServer=192.168.254.129
AuthSrvr=192.168.254.129
AuthPort=7009
LogHost=***.***.***.***
FwSrvr=192.168.254.129
NewTVer=4.1_50_2008.09.25.12.37
FWservType=FWSrvr
parmsVersion=4.1_50_2008.09.25.12.37
parmsBarrier=325
configMTU=1500
AltAuth=192.168.254.129,255.255.255.255
stopqon=0
bandwidth=100000000
/usr/local [EMAIL PROTECTED] # ping 192.168.254.130
192.168.254.130 is alive
The SunRay station has correctly received the IP.
If, on the server, I perform a :
cat /etc/dt/config/Xconfig
Dtlogin.validPAMclasses: SunRay
#########################################################################
#
# The following entries are dynamically created by Sun Ray.
# It is both dangerous and pointless to edit these lines.
# Any changes made here will be discarded at the next reboot.
#
# Sun Ray required parameters (DO NOT EDIT):
#
Dtlogin.pidFile: /var/dt/Xpid
Dtlogin.servers: Xservers
Dtlogin.SunRay.startup: Xstartup
Dtlogin.SunRay.setup: Xsetup
Dtlogin.SunRay.reset: Xreset
Dtlogin.SunRay.startAttempts: 1000
Dtlogin.SunRay.serverAttempts: 4
#
# Sun Ray dynamically created parameters (DO NOT EDIT):
#
# BEGIN SUNRAY CONFIGURATION
Dtlogin.*_2.environment: SUN_SUNRAY_TOKEN=pseudo.0003ba141c99
CORONA_TOKEN=pseudo.0003ba141c9*9*
# END SUNRAY CONFIGURATION
cat /etc/dt/config/Xservers
# BEGIN SUNRAY CONFIGURATION
# END SUNRAY CONFIGURATION
So, the connection between the SunRay Server and the SunRay station
seems to be good.
In the logs files, we can find:
cat /var/opt/SUNWut/log/messages
Nov 21 13:42:30 server1 gconfd (root-9603): [ID 702911 user.info] GConf
server is not in use, shutting down.
Nov 21 13:42:30 server1 gconfd (root-9603): [ID 702911 user.info] Exiting
Nov 20 13:49:43 server1 utauthd: [ID 293941 user.info] Worker2 NOTICE:
SESSION_OK pseudo.0003ba141c99
Nov 20 13:50:10 server1 utxexec[27158]: [ID 901666 user.error] utxexec
ERROR: Cannot open display :2
Nov 20 13:50:10 server1 root: [ID 702911 user.error] utxinit ERROR: X
session startup timeout, display 2
Nov 20 13:50:10 server1 utdtsession: [ID 702911 user.info] Delete
(2,pseudo.0003ba141c99)
And here:
cat /var/dt/Xerrors
Fri Nov 14 09:40:25 2008
error (pid 846): Server unexpectedly died
Fri Nov 14 09:40:30 2008
error (pid 846): Server for display :2 can't be started.
It seems to be a problem with the X exportation to the SunRay station...
What could be the reason for stopping procedure on the 26D and the X error ?
Thanks in advance.
Nicolas.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
