Also, what does "utcrypto" report?

-Bob

Bob Doolittle wrote:
The log messages look fine. I'm not sure what you mean by "red cross". Can you find the icon you see in the Sun Ray Administration Guide at:
http://docs.sun.com/source/820-3768/t-s.html#50417702_pgfId-1004338

Look at the number shown in the lower-right corner of the icon, and match it up to the codes in table B-1. What is the number?

-Bob

Mudasar Yasin wrote:
Hi,

Happy new year, can someone help me?

Best regards,

Mudasar Yasin

Associate Network Administrator

Network Operations Centre

From: [email protected]
[mailto:[email protected]] On Behalf Of Mudasar Yasin
Sent: Wednesday, December 31, 2008 6:00 AM
To: 'SunRay-Users mailing list'
Subject: [SunRay-Users] Sunray client throuhg VPN

Hi,

I have configured my Sunray server on a remote location, we have site to
site VPN connection with this site. I have map the Public ip to my sunray server(due to some limitation I cant use the private ip of sunray server but this public ip also goes through VPN ). I gave this Sunray server in sunray
client through GUI.
When I power up the Sunray client it get its static ip, find the sunray
server, but when it authenticate it fails, shows red cross. I see the sunray client hit on sunray server with its static ip. Following is the messages
/var/opt/SUNWut/log/messages

-----------------------------------------

Worker4 NOTICE: DISCONNECT IEEE802.00144fe7c6f8, pseudo.00144fe7c6f8
reauthenticatingDuplicateTID

 [ID 226395 user.info] SessionManager0 NOTICE: TERMINATE: ACTIVE session

 [ID 565377 user.info] Worker4 NOTICE: DESTROY pseudo.00144fe7c6f8
lifetime=1658599

[ID 190650 user.info] Worker4 NOTICE: whichServer pseudo.00144fe7c6f8:
[ID 108822 user.info] Worker4 NOTICE: CLAIMED by StartSession.m3 NAME:
pseudo.00144fe7c6f8 PARAMETERS: {stealProtected=true,
terminalIPA=192.168.150.193, type=pseudo, fw=GUI4.1_50_2008.09.25.12.37,
state=disconnected, cause=insert, doamgh=true, barrierLevel=325,
lockaction=disconnect, rawId=00144fe7c6f8, terminalCID=IEEE802.00144fe7c6f8, MTU=1500, tokenSeq=1, firstServer=400242ca, namespace=IEEE802, ddcconfig=1,
id=00144fe7c6f8, clientRand=Sn1MuqQl.pob.f0GdnvWQP3ew2H3D8cz3IJiGXNooR0,
realIP=c0a896c1, startRes=1280x1024:1280x1024, useReal=true, event=insert,
pn=54645, sn=00144fe7c6f8, rawType=pseudo, hw=SunRayP8, initState=1,
usersession=false, _=1}

 [ID 980366 user.info] Worker4 NOTICE: CONNECT IEEE802.00144fe7c6f8,
pseudo.00144fe7c6f8, all connections allowed

Dec 30 16:55:23 sunbox08 utauthd: [ID 118787 user.info] Worker0 NOTICE: MTU
= 1500

Dec 30 16:55:24 sunbox08 utdtsession: [ID 702911 user.info] Hotdesk
(2,pseudo.00144fe7c6f8,default)

Dec 30 16:55:24 sunbox08 utauthd: [ID 788132 user.info] Worker0 NOTICE:
SESSION_OK pseudo.00144fe7c6f8

-----------------------------------------

On sunray server I just enable the network connection
/opt/SUNWut/sbin/utadm -L on

/opt/SUNWut/sbin/utrestart

Can you please help me out? I also didn't enable dhcp.

One more thing to mention I have upgraded the sun OS through its patchs, and
during the installation of sunray server or configuration, it give me no
error. I can telnet all its ports and get the we administration page.
Best regards,

Mudasar Yasin

Associate Network Administrator

Network Operations Centre

I2c Incorporated


------------------------------------------------------------------------

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users



_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to