That's strange. What's your network look like?
Is your server multi-homed?
Are the Sun Rays on a LAN or an isolated, non-routed interconnect?
Are your networks fully routable to each other?
What does "ifconfig -a" report? utadm -l?
-Bob
Nadeem Ahmad wrote:
Hi
See the below output.
[r...@sunrayprimary sbin]# ./utquery -d 192.168.1.251
[r...@sunrayprimary sbin]#
[r...@sunrayprimary sbin]# ./utfwload -a
15.0 ???? 192.168.1.251 P8.00212839f679
MfgPkg_4.20_4.0_2007.08.22.15.25
[r...@sunrayprimary sbin]# ./utfwload -l
Upgrading units to version GUI4.1_50_2008.09.25.12.37:
15.0 ???? 192.168.1.251 P8.00212839f679
MfgPkg_4.20_4.0_2007.08.22.15.25
[r...@sunrayprimary sbin]#
I have tried to upgrade the firmware by using. /utfwload -l and even after
restart the Sun Ray client, it does not work. Thank you.
Nadeem Ahmad| Associate Network Administrator | Network Operations Center
| [email protected]
i2c Inc. | 900 Island Drive, Suite 150, Redwood Shores, CA 94065| URL:
www.i2cinc.com
Tel: (650) 593 5400 x4097 | 24/7 NOC: (650) 480 5291 | Fax: (650) 593 5402
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bob Doolittle
Sent: Tuesday, March 31, 2009 7:55 PM
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] upgrade firware of SUn Ray client
The command requested should have been "utquery -d IP_ADDRESS".
We don't get any useful output without the "-d" option.
-Bob
Nadeem Ahmad wrote:
Hi
See the output of your require commands. Let me know what I am doing
wrong.
[r...@sunrayprimary sbin]# ./utfwload
15.0 ???? 192.168.1.251 P8.00212839f679
MfgPkg_4.20_4.0_2007.08.22.15.25
[r...@sunrayprimary sbin]#
[r...@sunrayprimary sbin]# ./utquery 192.168.1.251
[r...@sunrayprimary sbin]#
[r...@sunrayprimary sbin]# ./utadm -l
LAN connections: On
Sun Ray interconnect framework is not configured
[r...@sunrayprimary sbin]#
Nadeem Ahmad| Associate Network Administrator | Network Operations
Center
| [email protected]
i2c Inc. | 900 Island Drive, Suite 150, Redwood Shores, CA 94065| URL:
www.i2cinc.com
Tel: (650) 593 5400 x4097 | 24/7 NOC: (650) 480 5291 | Fax: (650) 593 5402
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joerg Barfurth
Sent: Tuesday, March 31, 2009 2:50 PM
To: SunRay-Users mailing list
Subject: Re: [SunRay-Users] upgrade firware of SUn Ray client
Nadeem Ahmad schrieb:
Hi
We want to upgrade the firmware from MfgPkg_4.2.0_4.0_2007.08.22.15.25
to GUI4.1_50_2008.09.25.12.37 version. Please guide me how can we do
this. See below output. After restart the Sun Ray client , it is unable
to update its firmware. Thank you.
How do your Sun Rays get their network parameters and locate their
servers?
What does
utquery <IP address of the Sun Ray unit>
show?
What does
utadm -l
on your Sun Ray server show?
- Jörg
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
