Hello,
after installing Patch 139549-01 on the Rayservers the failover group does
not longer work.
Also a complete unconfigure and new configure of the Ray Software did not
work.
utreplica shows the correct settings
sunray2# utreplica -l
Sun Ray Core Services 4.1
Administration Failover Configuration
sunray2 is a primary server for:
sunray
sunray# utreplica -l
Sun Ray Core Services 4.1
Administration Failover Configuration
sunray is a secondary server
The primary server is: sunray2
But when I use the utgstatus only the localhost ist shown
sunray2# utgstatus
host flags interface flags
10.49.16.0/20
---------- -------------------
sunray2 TN 10.49.19.22 UA-
sunray# utgstatus
hostflags interface flags
10.49.16.0/20
--------- -------------------
sunray TN 10.49.19.21 UA-
The signature on both are the same. On the File /etc/opt/SUNWut/auth.props
LoadBalancing and GroupManager are true
# grep enableLoadBalancing /etc/opt/SUNWut/auth.props
# enableLoadBalancing
enableLoadBalancing = true
# grep enableGroupManager /etc/opt/SUNWut/auth.props
# enableGroupManager
#enableGroupManager = true
Before adding this Patch everithing was working fine.
Did you have any Ideas whats going wrong?
BR,
Norbert
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
