Hello SunRay-Users, While testing a new server we got a spare Sun Ray 1 DTU out of the closet, and discovered that it doesn't boot when any USB device is plugged into it. This includes keyboard and mouse.
The symptoms are: the DTU displays its initial boot OSD (status 1), resets, flashes the amber light for about 3 seconds and goes to OSD-1 again. Endless loop, until we plug out all USB devices. Then it finds DHCP server, X11 server and so on. If we plug the keyboard/mouse into the DTU, it works until we reset it in any manner (stop+a and power cord replug included). We tried updating to the latest firmware (SRSS-4.1 and SRSS-4.1p1), as well as rolling back to our currently common firmware (SRSS-4.0p3); namely: GUI4.0_127553-03_2008.05.14.13.48 GUI4.1_50_2008.09.25.12.37 GUI4.1_139548-01_2008.12.08.15.16 It is not a firmware problem, as far as we can tell. Another similar DTU was also updated to the latest firmware and it simply works as expected. Is the hardware botched, or can anything be done to recover this DTU for normal operation? Has anyone else encountered such behavior? -- Best regards, Jim Klimov mailto:[email protected] _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
