Hello Aaron,

  That's one option.

  In our case, the DTUs were in a remote network, so we edited
the DHCP server macros to point to the TFTP server with a new
firmware and then used the GUI menu to pick the X11 server.

Friday, April 17, 2009, 9:08:27 PM, you wrote:

AW> 1) You can use the GUI firmware to point the DTU to
AW>    whichever server you need

AW> For this option would I update the firmware on the DTU in question from
AW> our existing 4.0 server using utfwadm with the switch to specify a 
AW> specific firmware file?
AW> ....then do a stop-s to get the pop-up gui?



AW> Aaron

AW> Jim Klimov wrote:
>> Hello Aaron,
>>
>> Friday, April 17, 2009, 2:48:11 AM, you wrote:
>>
>> AW> We currently have two servers running in failover. Those servers I 
>> AW> believe are running SRSS 4.0 and Solaris 10 U5.
>>
>> AW> We want to test out OpenSolaris 2008.11 and SRSS 4.1
>>
>> AW> I've followed the instructions on the wiki:   
>> AW> http://wiki.sun-rays.org/index.php/SRSS_4.1_on_OpenSolaris_2008.11
>>
>>
>> AW> I've gotten all the way to " Sun Ray Server 4.1 Topology Configuration
>> AW> Instructions" and run a "utadm -a vr0" and then did the utconfig...
>>
>> AW> Trying to just test this OpenSolaris/SRSS4.1 install with a single
>> test DTU.
>>
>> AW> Not sure what to do next to make that DTU boot from the test server 
>> AW> instead of our normal SRSS environment.
>>
>> Did that recently, you have a number of options:
>>
>> 1) You can use the GUI firmware to point the DTU to
>>    whichever server you need
>> 2) You can make a dedicated subnet (i.e. by VLANs
>>    or physical cabling) so your DTU communicates with
>>    the correct server
>> 3) You can configure the DHCP server(s) to issue the
>>    DTU's MAC address some specific macros pointing to
>>    the correct server (and/or firmware).
>>
>> For option 3 you might want to convert the Sun DHCP
>> store to text file format (instead of binfiles) so as
>> to copy and edit the macros in a simple unsupported
>> manner :)
>>
>>   




-- 
Best regards,
 Jim Klimov                            mailto:[email protected]

_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users

Reply via email to