The areas would not get repainted. The greeter icon would only be 3/4 complete and would never fill in the rest. Even after I ended the windows session, the icon would be redrawn but only about 3/4 of it again. Sometimes it would complete the bottom and leave out 1/3 in the middle.
-costa -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kent Peacock Sent: Tuesday, July 28, 2009 12:52 PM To: SunRay-Users mailing list Subject: Re: [SunRay-Users] Graphic performance problems with SunRay 2FS On 07/28/09 08:57, Constantine Morris wrote: > I tried dropping the MTU several times without success. I then swtiched > the DTU to go over our FioS conenction instead of the T1 connection to > the internet and the stalled lines went away. Both my T1 and FioS > conenctions are connected to the same physical switch on the outside of > the network so it was just a matter of changing the live IP on the DTU. > I'm assuming the stalled lines had to do more with bandwidth/latency > than anything else. Where there areas that didn't get painted, and then were redone? If so, that's purely packet loss. Bandwidth/latency would not be the issue if it works okay once you're logged in. Kent _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
