The overall printer setup process should be described here:
http://wikis.sun.com/display/SRWC2dot2/Task+Map+-+Managing+Printers
If there is any missing information or the current information needs
to be made more clear, please leave a comment.
Thanks,
Paul
Craig Bender wrote:
You need to setup a raw queue on the Solaris side for mapping the printers.
/usr/sbin/lpadmin -p <printer-name> -v \
/tmp/SUNWut/units/IEEE802.<mac-address>/dev/printers/<device node>
Jacob Grundmeier wrote:
This is an example on the non laser printer that has been tried.
/opt/SUNWuttsc/bin/uttsc -g 1200x960 -A 24 -r printer:HP6122 -T
WindowsXP_VM_Printer 10.25.53.92
/opt/SUNWuttsc/bin/uttsc -g 1200x960 -A 24 -r printer:HP6122="hp
deskjet 6122 series" -T WindowsXP_VM_Printer 10.25.53.92
Here's how it's configured:
Banner: on
Content types: postscript
Device:
/tmp/SUNWut/units/IEEE802.00144fe7adce/dev/printers/hpMY3842B1CB66
Interface: /usr/lib/lp/model/standard_foomatic
Printer type: unknown
Modules:
Options:
PPD:
/usr/lib/lp/model/ppd/system/foomatic/HP/HP-DeskJet_6122-hpijs.ppd.g
This particular printer will print PS junk. I'm assuming this might be
a driver issue because it prints in Solaris. The printer is a
non-laser printer.
The lasers I've tried were an HP and a Lexmark(again don't remember
the models but they both supported PS). For those I set the cue up in
Solaris with no PS filter so that everything going to the printer
should be raw. With those, printing from Solaris worked just fine but
when I sent it to Windows I got an error when trying to print.
I apologize for not having specifics but it's been a while since I've
run into this and just recently I've been asked about this again, but
in a more general sense. So if this isn't specific enough I might have
to wait until I get more details to give.
Jake
------------------------------------------------------------------------
How are you setting up the queue and what options are you passing to
uttsc?
Jacob Grundmeier wrote:
> I've have been trying to get several direct attached printers to
work with the uttsc. So far I've been unsuccessful. Does anybody have
any known printers or printer configurations that work? I don't have
any specific models that I have tried except that they were all laser
printers except one. Also, I've got all of them to work with Solaris
directly attached but again not with uttsc.
>
> Thanks
> Jake
>
>
>
------------------------------------------------------------------------
>
> _______________________________________________
> SunRay-Users mailing list
> [email protected] <mailto:[email protected]>
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected] <mailto:[email protected]>
http://www.filibeto.org/mailman/listinfo/sunray-users
------------------------------------------------------------------------
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
--
Paul Kasper | Documentation Lead | [email protected] | x51546
Desktop Virtualization Products
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
