What cash drawers are you using? I may have a need to set up cash registers.
Thanks -----Original Message----- >From: Randall Cruz <[email protected]> >Sent: Aug 18, 2009 1:02 AM >To: SunRay-Users mailing list <[email protected]> >Subject: [SunRay-Users] SunRays in cashier POC > >Hi folks, > >I have been doing a POC (Probe of Concept) with a Bank to test SunRays >DTUs in a cashier area. The DTUs on windows sessions works perfect but a >I have a issue with the printers... > >All the cashiers printers are "Centronics" so I am using a >ubs-centronics converter and it works very nice... but the printer is a >especial type of printer that has two output devices. > >I mean a termal printer to print a ticket for the customer and a normal >matrix printer to print the ticket for the cashier... > > From windows the test print output is correctly directed to the >especific printer output but the software of the bank is unable to >correctly route the print info to the correct printer device (Termal o >Matrix) > >The cashier's software is looking for a LPT1 and that Epson printer has >a special driver that works like a print proxy so the output generated >from the bank's cashier software is sent to a LTP1 and prints the two >tickets if I made the test of the printer with a PC. > >But in the case of a SunRay DTU I have to create in the windows >connector to devices (TS001 and TS002) and from windows everything >works nice but not with the cashier program... > >Any advice will be very welcome! > >Best Regards, > >Randall >_______________________________________________ >SunRay-Users mailing list >[email protected] >http://www.filibeto.org/mailman/listinfo/sunray-users _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
