> If you don't know how you are provisioning the DTU network parameters,
> to find out how your Sun Ray gets its network settings use
> /opt/SUNWut/sbin/utquery <IP of DTU>
>
> On the server side
> /opt/SUNWut/sbin/utgstatus
> /opt/SUNWut/sbin/utadm -l
> may provide relevant information.
>
> The output of these command might help us help you.
>
I have done this commands, here is the output. I have a Netgear router. I
suspect it is only a matter of repointing the DTU to listen to 192.168.1.3
instead. But I dont know how to do that. Maybe I should reinstall everything?
# /opt/SUNWut/sbin/utquery 192.168.1.2 <---- this has no output! The DTU
reboots(?)
# /opt/SUNWut/sbin/utgstatus
hostflags interface flags interface flags
192.168.1.0/24 192.168.56.0/24
--------- ------------------- -------------------
frasse TN 192.168.1.3 UA- 192.168.56.1 UA-
# /opt/SUNWut/sbin/utadm -l
LAN connections: On
Use IPv4 multicast
Subnetwork: 192.168.1.0
Netmask= 255.255.255.0
AuthSrvr= 192.168.0.181
AltAuth= 192.168.0.181
FirmwareSrvr= 192.168.0.181
NewTver= 4.2_77_2009.10.19.17.01
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
