On 02/05/10 10:45, gerard wrote:
thanks for all replies.
I suspect the problem arose because:
- when i configured callisto, the ce1 isn't on the network (i worked
from remote place)
- so, after plugin the ce1 card in the correct switch (2 days after
the configuration), i have to do "utreplica" on the primary server and
on callisto, that did the trick.
So now, everything is ok. I don't know if it's correct.
And a pitfall of the use of utreplica, is that my users were surprised
by the restart of their DTU's, and few of them doesn't wait the end of
the process, because they are presented the dtlogin of another server.
So it results in having two sessions, with thunderbird blocked.
Hopefully, i've just discovered the "utselect" command!.
I'm wondering if it is possible to launch utselect when they log in,
presenting the different servers, showing the load, and permit to
choose the right server?
Yes, edit /etc/opt/SUNWut/auth.props file and make selectAtLogin=true.
Restart services.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer
I konw that load balancing does the job, but sometimes, the DTU stays
on the same server as you can see on the following picture:
http://www.latp.univ-provence.fr/~henry/Solaris/dl/Screenshot-3.png
I took the screenshot before the beginning of the day, so the load is
small.
thanks again for help,
gerard
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
