Kevin Taylor schrieb:
We installed SRSS 5 on a CentOS 5 server and have everything set up with
several SunRay 2FS DTUs and a single SunRay 2 (non-FS) DTU. I've
verified that I've installed the Pop-Up GUI on the clients, but I'm
unable to bring up the gui on the FS units, but the non-FS unit works fine.
I've tried using a Sun keyboard with STOP-M and STOP-S, but nothing
brings up the gui. I've used a regular PC keyboard, and tried
Ctrl-Pause-M and Ctrl-Pause-S, with no luck. If I hook the same keyboard
up to the non-FS DTU, then the gui comes up immediately with the same
key presses.
Is this a bug in the software, or does anyone have any help to offer?
How did you verify that you have the right firmware?
What happens, if you press STOP+V (or Ctrl+Pause+V) on the 2FS units?
What version string does that report (assuming it works at all)?
If I can't get this to work, is there a way in the SRSS that I can
manually configure the DTUs IP addresses? Or can that only be done
through the pop-up?
Static IP addresses can only be configured through the pop-up.
Without it, you have to use DHCP (which you can use to assign fixed DHCP
addresses to DTUs, if you control the DHCP server).
- Jörg
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
