Message: 5
Date: Tue, 4 May 2010 12:47:15 -0400
From: Kevin Taylor <[email protected]>
To: <[email protected]>
Subject: Re: [SunRay-Users] Pop-Up GUI and SunRay 2FS DTUs with SRSS 5
on, a linux server
Message-ID: <[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
Ok. The output from utquery shows that the unit did not get the firmware, and
is still running with the default.
terminalIPA= x.x.x.x
model = SunRayP8
Subnet = 255.255.255.0
Router = x.x.x.1
MTU = 1500
Broadcast = x.x.x.255
LeastTim = 86400
DHCPServer = x.x.x.x
AuthSrvr = x.x.x.x
AuthPort = 7009
LogHost = x.x.x.x
FwSrvr = x.x.x.x
It really would have been useful to see the FwSrvr IP address. This is
where the DTU is attempting to retrieve the firmware file.
NewTVer = GUI4.2_77_2009.10.19.17.01
CurrentAuth = x.x.x.x
CurrentFW = MfgPkg_4.15_2006.07.20.16.57
CurrentBarrier = 310
CurrentBarrierLevel = 310
AltAuth = x.x.x.x
I was fairly certain I had run the right commands to get the firmware updated
on the DTUs, but for some reason it isn't taking.
I've tried:
utfwadm -A -f /opt/SUNWut/lib/firmware_gui -a -F -N all
utfwadm -A -f /opt/SUNWut/lib/firmware_gui -e xxxxxxxxxxxxxx -F
utfwload -aL
Did you (re)create your /tftpboot directory? I use utfwadm -AauV -f
/opt/SUNWut/lib/firmware_gui. The -u is a good way to see that the
firmware is in fact downloading.
The last one gives me the message
Upgrading units to version GUI4.2_77_2009.10.19.17.01
11.0 ???? x.x.x.x P*-PS.<macaddr> MfgPkg......
I've power cycled the DTU several times as well, but each time the result of
utquery is that it's currently running the other firmware.
Am I doing something wrong?
Firmware downloads can be tricky. It's easy to miss something simple.
We can work through it offline if you like and post the solution when we
find it.
Art
Thanks for the response.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
