Good morning all.
I had my new SunRay sever on one IP/vlan to test build it. On this
segment, the server was not a DHCP server. Now that I'm switching over to the
new IP/vlan, it will act as a DHCP server. However the kiosks don't seem to be
checking for an IP from the server (DHCP is running, no queries/leases). Then
I figure I will delete the interface and re-add it, maybe a setting or
something was missed, but then I get this.
[r...@kiosk sbin]# ./utadm -d eth0
Error: Interface "eth0" is not configured; cannot delete
[r...@kiosk sbin]# ./utadm -a eth0
### Configuring /etc/nsswitch.conf
### Configuring Service information for Sun Ray
Interface "eth0" is already configured as
hostname "kiosk"
To configure eth0 as a dedicated interconnect:
remove the file /etc/opt/SUNWut/net/hostname.eth0 and
remove the host entry kiosk or use a different hostname.
Please use the -A option to configure support for shared networks.
There is no hostname.eth0 file, and if I remove the kiosk entry in /etc/hosts,
I get:
hostname: Unknown host
Error: host IP address must be set
Set host IP address and try again
Any ideas? Currently now all my systems are down so hurray Monday mornings! :o)
Brian Imbriani
Network/Systems Administrator
Adelphi University
(516)877-3748
[email protected]
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
