Hi,
The "blinking pixels " could be explained by a misconfigured
network. Sun Rays use a protocol loaded into UDP
frames and it runs into problems if you have Switch-ports which
are hard configured to FULL DUPLEX or configured
to HALF DUPLEX You need to have you switch ports configured to
NEGOTIATE the line speed and duplex type.
There is also switches with no bufferhandleing when switching from
Gigabit to Fast ethernet. Here UDP frames
are also lost. Make sure UDP frames are propagated correctly through
your network.
The blue "smurf-like" Flash-videos with the Linux flash10 player
is a well known problem
Download the Flash 9 player as documented here.
http://wiki.sun-rays.org/index.php/Sound
2010-10-27 18:33, Tarek Mhamdi skrev:
Hi everyone,
I am new to this mailing list. I am trying to setup new terminals that
we just received but I am having problems with the graphics.
The problems are mainly with the Sun Ray 3 plus units. The monitors
are the Sun 24.1 LCD v4.
I get blinking/flashing pixels especially for the resolution 1920x1200
(If I select a lower resolution, there are fewer blinking pixels but
the display is smaller with black edges).
When I connect the same monitor directly to the Sun Ray server, I
don't have any problem.
The blinking problems does not appear in the Sun Ray 270 units but
when I try a youtube video, the picture is bluish...
SSRS 4.2
SLES 10 SP2
Nvidia GT220, 1GB RAM
Dell with 16GB RAM
Your help is really appreciated,
Thanks,
Tarek
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
