On 2/7/2011 10:27 PM, Jonathan C. Bailey wrote:
Just confirmed that -D fixed it for me...
Should I expect the same/similar issue when we go to Windows 7 desktops
(without the -D option)?
Most likely.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer
-Jon
----- Original Message -----
From: "P.S.M.Swamiji"<[email protected]>
To: [email protected]
Sent: Monday, February 7, 2011 10:18:51 AM
Subject: Re: [SunRay-Users] VDI 3.2.2 - grid lines, etc missing?
On 2/7/2011 9:42 PM, Jonathan C. Bailey wrote:
I looked in the man page, and I can only find -M for accelerated media paths
and -F for flash acceleration paths. I'm not finding anything that looks new to
me..
Make sure you are using RR/FCS version of 2.3.
You can use -D (Just -D) option to disable RCA acceleration.
There were some known rendering issues which seems resolved
with -D option. If you are using Winfows XP then it is a good workaround ,
since RCA accelaration mainly for W2008 R2& Windows 7 and so
you won't be having any functionality loss on XP.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer
-Jon
----- Original Message -----
From: "Devin Nate"<[email protected]>
To: [email protected]
Sent: Monday, February 7, 2011 10:02:45 AM
Subject: Re: [SunRay-Users] VDI 3.2.2 - grid lines, etc missing?
I believe there's a new param in srwc 2.3 to control 2008 acceleration. I'm not at a computer, so I'd verify
by uttsc man page, but I believe adding "-D" to your uttsc args will disable the new acceleration.
It also may be "-D off" or "-D 0".
The symptoms you're describing we also had, and solved with the above.
Thanks,
Devin
----- Original Message -----
From: Jonathan C. Bailey [mailto:[email protected]]
Sent: Monday, February 07, 2011 07:36 AM
To: SunRay-Users mailing list<[email protected]>
Subject: [SunRay-Users] VDI 3.2.2 - grid lines, etc missing?
Hello,
We just upgraded from VDI 3.2.1 to 3.2.2 this weekend (so we now have SRWC
2.3), and have noticed that in some applications, grid lines and/or other
elements are either missing, or corrupted (misaligned, etc). We're connecting
to XP SP3 VMs via Windows RDP. Nothing has changed on the VM since the upgrade.
I've attached a screenshot that hopefully get through to illustrate the
problem. The pargs for uttsc-bin of that session are below (sanitized):
8739: /opt/SUNWuttsc/lib/uttsc-bin -u jcb -N off -S 5 -i -d MCIS -r usb:on -m
-x :19.
argv[0]: /opt/SUNWuttsc/lib/uttsc-bin
argv[1]: -u
argv[2]: USERNAME
argv[3]: -N
argv[4]: off
argv[5]: -S
argv[6]: 5
argv[7]: -i
argv[8]: -d
argv[9]: DOMAIN
argv[10]: -r
argv[11]: usb
argv[12]: -m
argv[13]: -x
argv[14]: :19.0
argv[15]: VMIP
Any thoughts?
-Jon
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
