Dula, If you have setup your sunray server to push the gui firmware to your sunrays, press Stop-M (simultaneously) to bring up the gui configuration menu. To check if the gui firmware is installed, press Stop-V. If the firmware says gui_<version_number> you are good to go. Otherwise, you will need to configure the sunray server to push the gui firmware.
James Kissler On Thu, May 12, 2011 at 10:00 AM, Michael Jinks <[email protected]> wrote: > On Thu, May 12, 2011 at 12:41:56AM -0700, dula boru wrote: >> hello, >> >> >> how to access the GUI of the sun DTU for the first time after installation >> and >> configuration is completed if the server is headless? >> >> i configured the srss 3.1 on solaris 10 and i cann't access the DTU client. >> >> anyone who has help? > > All of our servers are headless; that shouldn't matter. > > Are you sure that Sun Ray services are running? There are post-setup > configuration steps you need to take, depending on your network > arrangement, and how you want to use the system. (See for instance > "utadm".) > > Is your DTU failing somehow? What's the failure code, if so? > > What does the output of 'utgstatus' look like on your server? > > Are you running your Sun Rays on a dedicated network, or on the same > network with the rest of your hosts? > > -- > Michael Jinks :: [email protected] > Technical Lead or something, Applications and Collaborative Technologies > University of Chicago IT Services > Sorry this took so long. > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users > _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
