Hi,
I'm using an Sunray3 and I want to disable the sleep/power off mode.
Now I have read a lot about this, how to disable this.
set in .prams file the following entry : poweroff=0
I have put this in mine own config file, like this:
# cat /tftpboot/srssconfig
server=10.1.1.1
poweroff=0
And run the following command:
# /opt/SUNWut/sbin/utfwadm -A -a -V -i /tftpboot/srssconfig -f
/opt/SUNWut/lib/firmware
Mine /tftpboot/SunRayP10.parms looks then like this:
# cat /tftpboot/SunRayP10.parms
version=4.3_146928-01_2011.06.03.14.41
revision=1
barrier=430
server=10.1.1.1
poweroff=0
This output I got if I run utquery:
# /opt/SUNWut/sbin/utquery -d 10.1.1.159
terminalID=002128907640
terminalIPA=10.1.1.159
model=SunRayP10
currentAuth=10.1.1.1
currentFW=4.3_146928-01_2011.06.03.14.41
currentBarrier=430
currentBarrierLevel=430
currentMTU=1500
currentLease=86286
Subnet=255.255.255.0
Router=10.1.1.1
MTU=1500
Broadcst=10.1.1.255
LeaseTim=86400
DHCPServer=10.1.1.1
INFORMServer=10.1.1.1
FWservType=none
speed=100F
configMTU=1500
confEnabled=0
stopqon=0
bandwidth=100000000
cmdcachesize=512
poweroff=30
But still the Sunray3 power off after 30 min.
I cannot check it via the "Pop-up GUI's Advanced Menu" because this is not
working on mine configuration.
Can anyone tell me the exact commands (with the command line) I must use to
disable this sleep/power off feature.
Thanks in advance,
John
--
The information contained in this communication and any attachments is
confidential and may be privileged, and is for the sole use of the intended
recipient(s). Any unauthorized review, use, disclosure or distribution is
prohibited. Unless explicitly stated otherwise in the body of this
communication or the attachment thereto (if any), the information is provided
on an AS-IS basis without any express or implied warranties or liabilities. To
the extent you are relying on this information, you are doing so at your own
risk. If you are not the intended recipient, please notify the sender
immediately by replying to this message and destroy all copies of this message
and any attachments. ASML is neither liable for the proper and complete
transmission of the information contained in this communication, nor for any
delay in its receipt.
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
