Since this is Linux, I would second CJ's thoughts and look at the host
file for naming problems.
Standard RH style host files have the host name on the same line as the
loopback. That breaks quite a few things. The web admin interface,
utadm, and possible utreplica.
Make sure that your host file has the host name on it's own line, here's
how I would set mine up.
127.0.0.1 localhost locahost.localdomain
183.167.250.39 triceratops triceratops.here.ac.uk
183.167.250.3 balur balaur.here.ac.uk
On 12/7/11 8:17 AM, Cj wrote:
John,
Maybe the problem is host-naming related ?
Triceratops thinks it is a primary for balaur, not for balaur.here.ac.uk
(which is the name being output in the error message for the failed
utreplica -s command).
Maybe setting triceratops as the primary for balaur.here.ac.uk will
work ? Sometimes it is using names and sometimes IP addresses ?
Just a thought
Cheers
Cj.
------------------------------------------------------------------------
*From:* [email protected]
[mailto:[email protected]] *On Behalf Of *john halfpenny
*Sent:* 07 December 2011 14:45
*To:* SunRay-Users mailing list
*Subject:* [SunRay-Users] FOG join failure
Hi Everyone
I have CentOS5 64-bit running srs5.2 working fine as a standalone.
For the past few days I've been attempting to set up a FOG with no
success at all. I already had this working successfully on Ubuntu and my
steps so far haven't been so very different on CentOS, I've exhausted
all I can find and have explored all the avenues discovered. I'm
beginning to lose my mind.
Ok, I get this on the primary (triceratops):
[root@triceratops ~]# /opt/SUNWut/sbin/utreplica -l
Sun Ray Server Software 4.3
Administration Failover Configuration
triceratops.here.ac.uk is a primary server for:
balaur
[root@triceratops ~]# /opt/SUNWut/sbin/utgstatus
host flags interface flags
183.167.250.0/32
------------------------- -------------------
triceratops.here.ac.uk TN 183.167.250.39 UA-
balaur.here.ac.uk TN 183.167.250.3 UA-
But on the secondary (balaur) I get this:
[root@balaur ~]# /opt/SUNWut/sbin/utgstatus
host flags interface flags
183.167.250.0/32
------------------------- -------------------
balaur.here.ac.uk TN 183.167.250.3 UA-
triceratops.here.ac.uk TN 183.167.250.39 UA-
[root@balaur ~]# /opt/SUNWut/sbin/utreplica -s triceratops
Sun Ray Server Software 4.3
Administration Failover Configuration
utreplica: Error, triceratops is not configured as a Primary for
balaur.here.ac.uk.
It makes no difference whether I use multicast with an outrageously high
TTL or fall back to broadcast, or even if I try to set the secondary
first. It always ends with the same result, and I end up doing utreplica
-u, then a utconfig -u and starting again after a reboot to have another go.
Has anyone any clue where I could look just to understand where it is
failing?
My secondary is a clone of the primary, having all references of
hostname altered, and a utconfig uninstall/install cycle performed.
Thanks for any advice!
John
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
