Has anyone here successfully flashed an Adaptec 2940UW PC SCSI card to work in a Mac?
I've followed the directions and have all the flashing utilities, but I can't get the
Mac ROM image resource from the Mac flashing utility. You're supposed to be
able to extract it using ResEdit, and I can *see* it OK, but how do you "extract"
it to a separate file?
What I need to know is how do you extract a resource from one file into a new file?
Dan, if you can get your hands on teh version 4.1 firmware update, you can just flash the card in a Mac and don't need to mess wtih extracting the resources. I tried what you're doing way back when, and couldn't get it to work properly either. That's why I finally just desoldered the Flash chip, installed the larger capacity one, and flashed it in a Mac. Back then, the latest firmware was 3.1 and it wouldn't flash successfully unless you replaced the chip, but the 4.1 works without hardware modification.
Jeff Walther
-- SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
