on 1/7/04 10:15 AM, BigMomma at [EMAIL PROTECTED] wrote: > Hi All. > I have a 250, I think, Zif card in one of my S900's and wanted to > replace it with a 300 one that I bought from someone on the list. > However, when I switched cards the machine would not boot. I tried > changing some of the switches but to no avail. Would anybody be able to > let me know what the settings should be for either card? I totally > forgot to copy down the switch positions that worked in the first card > before I changed them. > Many Thanks > Jacqueline >
Momma - I don't know about pin settings but I do know that the Cuda switch has to be "reset" after a new processor installation. It's a push button on the motherboard by the bottom most PCI slot labeled "CUDA" (oddly enough). Alan C -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
