1) Is it possible, in the traffic shaper
- to create another parent queue (parent to HFSC)
- and to add some rules to this queue, so that traffic coming and
going from specific ip adresses would go through this queue (which
would have separate bandwidth)?
My WAN consists of 2 types of speeds: a separate speed for the
internet and a separate speed to the metropolian area (which is also
on the internet, public ip addresses)
+--+ Internet (256Kb)
LAN +--+ PfSense +--+
+--+ Metropolian area (10Mb)
I wanted the Internet to be traffic shaped and the rest of the
Metropolian Area to go through a separate queue (10Mb).
If this is not possible with the current configuration, just by hand,
would there be a possibility to do it somehow with routing? For
example 2 NICs, 2 public ips.
2) Also is it possible to equally share the bandwidth with the users on the lan?
For example if there are 4 lan users, each user equally gets 25% of
the bandwidth.
If one user would leave, the others would each share 33% of the bandwidth.
Thank you in advance.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
