On Wed, December 23, 2009 9:53 am, Koray AGAYA wrote: > This error Category is "ERRORS IN" not Collisions or Errors Outpuýt What > Does it mean "ERRORS IN" I checked Switch Does not have a problem How to > resolve this problem > > Which log can I look ? Not enough for me I dont know Why occur this error > Please help me This error continuous increase. Now plus 104 and then > about > two hours > Dear Agaya,
In and outgoing mostly mean that there is a duplex mismatch of somesort between your machine and the switch to which you are connected to. It could mean that your machine is performing on half duplex and that more packets then possible are being sent. It might not be entirely visible on the machine itself, but on the connected switch you should be able to see the same information. On a cisco that would mean: sh interface fa0/1 (for example) where you will find various counters. Since there are only a few packets being error'ed, it could mean that it doesn't heavily interfere with it. When the rate increases more and more something is evily wrong. Please check cabling as well. Cheers, Remko -- /"\ Best regards, | [email protected] \ / Remko Lodder | re...@efnet X http://www.evilcoder.org/ | / \ ASCII Ribbon Campaign | Against HTML Mail and News --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
