So, it does not detect the sensor. What's the firmware? > # cat /etc/issue
You might have tried another cable. If it's the board - I would check the connector first. Then the power, then i2c bus. Links to schematics are under the diagrams here <https://wiki.elphel.com/wiki/10353>. Regards, Oleg On Fri, Aug 17, 2018 at 1:41 PM Linden @ Zone4 <lin...@zone4.ca> wrote: > Thanks Oleg. > > 000E64081C8B > Here is the requested diagnostics: > > https://docs.google.com/document/d/1WfGlWGk0A7zLgAl1EptMntTKoKLJLodron0P0zYcpB4/edit?usp=sharing > > 000E64081CA1 > I will send that one back to you. Will wait until we know if 000E64081C8B > needs to go back as well or if I can resolve the issue here. > > The one with the color tinting is behaving much better. > > Thanks, > _______________________________________________ > Support-list mailing list > Supportfirstname.lastname@example.org > http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com Best regards, Oleg Dzhimiev Electronics Engineer phone: +1 801 783 5555 x124 Elphel, Inc.
_______________________________________________ Support-list mailing list Supportemail@example.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com