> Thank you for the detailed description. Following your steps I was able > to switch the cam into triggered mode. The next step I want to do is to > mount the 359 board in the camera case. Do you have picture where it can > be placed? >
Andreas, for a single sensor - it could be placed under the 10353 board - the holes will not match, unfortunately - the 10359 board was designed for older revision of the 10353 board, but it is still possible to mount it there. For thew stereo - I would mount it separately, between the sensors - we co have metal parts fro that (show on Elphel wiki - http://wiki.elphel.com/index.php?title=Elphel_camera_parts#MNC354-2 > The second step is to connect two sensor boards via a 6 inch flex cable. > I read the article "dealing with phases". The question is, is it > possible to get the two sensor boards with the long flex cable fully > functional? Do I have to adjust some parameter values in the FPGA code? > Oleg is working on the 10359 code and he is coming to Elphel next week. We do have a stereo setup with long cables and Oleg will be able to help you with that when he'll be here. Andrey
_______________________________________________ Support-list mailing list [email protected] http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
